Vibratory Amplitude Control - Adjust
This procedure prevents the hand wheel for the amplitude setting from becoming stuck.
- Pull the setting disc outward. The setting disc is located on the left side of the front drum and on the right side of the rear drum.
Show/hide table
 | |
| Illustration 1 | g01162669 |
- Rotate the hand wheel to the HIGH setting.
Show/hide table
 | |
| Illustration 2 | g01162674 |
(1) HIGH (2) MEDIUM (3) LOW | |
- Rotate the hand wheel to the LOW setting.
- Rotate the hand wheel to the MEDIUM setting.
- Return the hand wheel to the original setting.
- The hand wheel should rotate easily. If the hand wheel does not rotate easily, repeat steps 1 through 5.
Caterpillar Information System:
3500 Engines Engine Overspeed
3500 Engines Crankcase Pressure (High)
2012/05/25 A New Transmission Bolt Improves Service Life {3030}
140M Motor Grader Capacities (Refill)
2005/05/02 Special Instruction, REHS2491 , "Instructions for Converting Intermittent Saw to Hot Saw " Is Available {5051, 5051, 5057, 6543}
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
2005/04/25 Correction to Testing and Adjusting , "Hoist System Pressure" {5136, 5136}
2005/04/25 Correction to Specifications , "Hoist Control Valve" {5136}
793D Off-Highway Truck Engine Oil and Filter - Change
793D Off-Highway Truck Engine Oil Sample - Obtain
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train MID 081 - CID 0626 - FMI 04
793D Off-Highway Truck Engine Oil Level - Check
966H and 972H Wheel Loaders Machine Systems Brake Control Valve (Parking) - Disassemble
966H and 972H Wheel Loaders Machine Systems Brake Control Valve (Parking) - Assemble
793D Off-Highway Truck Engine Water Pump - Inspect
793D Off-Highway Truck Fuel System Secondary Filter - Replace
AP-1055D and BG-2455D Asphalt Pavers Propel System Piston Pump Flow - Test
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Braking and Hydraulic Fan System Piston Pump (Brake, Hydraulic Fan)
C18 Generator Set Manual Stop Procedure - EMCP 3 (If Equipped)
793D Off-Highway Truck Rear Axle Oil Filter - Replace
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Gear Motor (Hydraulic Fan)
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System Calibration
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Electronic Control Module (ECM) - Replace
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Electronic Control Module (ECM) - Flash Program