2012/05/25 Caterpillar


A New Transmission Bolt Improves Service Life {3030}

Usage:

972G 1EW
Landfill Compactor:
816F (S/N: BMR1-UP)
Soil Compactor:
815F (S/N: BKL1-UP)
Wheel Dozer:
814F (S/N: BGF1-UP)
Wheel Loader:
966GSeries II (S/N: AXJ1-UP; ANT1-UP; AWY1-UP; ANZ1-UP)
966G (S/N: 3ZS1-UP; 9RS1-UP; 3PW1-UP; 3SW1-UP)
972GSeries II (S/N: AXC1-UP; AXN1-UP; AWP1-UP; ANY1-UP)
972G (S/N: 7LS1-UP; 1EW1-UP; 4WW1-UP; 6AW1-UP)
Service Magazine SEPD0781, 25 April 2005, "A New Transmission Bolt Improves Service Life". Disregard this article. Refer to the following article.

Description of Change: A new bolt and a new washer are now used in the planetary transmission. The new bolt and the new washer will provide better durability.

Adaptable To: The 195-7879 Special Bolt has been replaced by the 262-9948 Special Bolt and the 165-0142 Hard Washer .

The new bolt has a larger radius under the head in order to improve durability. The new washer is required with the new bolt. Use special care in order to ensure that the old 5P-8249 Hard Washer is not used with the new bolt. The old 5P-8249 Hard Washer will fit over the shank of the new bolt, but will interfere with the larger radius of the new bolt.

This change is effective with the following machines.

  • 966G Series II (S/N: ANT314-UP; ANZ1252-UP; AWY1324,1327,1331-1336,1339-UP; AXJ2576-2577,2579-2580,2582,2584,2586-2587,2589-2590,2592-2598,2600-2604,2606,2610-2612,2615,2617,2619-2621,2623-UP)

  • 972G Series II (S/N: ANY409-UP; AWP527-UP; AXC978-979,981-982,984-988,991-UP; AXN508-509,512-UP)

This change is adaptable to the following machines.

  • 814F BGF344-UP

  • 815F BKL745-UP

  • 816F BMR487-UP

  • 966G (S/N: 3PW842,845,849-853,855-857,859-867,869-UP; 3SW909-UP; 3ZS529-UP; 9RS1088-1092,1095-UP)

  • 966G Series II (S/N: ANT1-313; ANZ1-1251; AWY1-1323,1325-1326,1328-1330,1337-1338; AXJ1-2575,2578,2581,2583,2585,2588,2591,2599,2605,2607-2609,2613-2614,2616,2618,2622)

  • 972G (S/N: 1EW535-537,540-UP; 4WW562-UP; 6AW363-364,366-UP; 7LS331-UP)

  • 972G Series II (S/N: ANY1-408; AWP1-526; AXC1-977,980,983,989-990; AXN1-507,510-511)

Caterpillar Information System:

140M Motor Grader Capacities (Refill)
2005/05/02 Special Instruction, REHS2491 , "Instructions for Converting Intermittent Saw to Hot Saw " Is Available {5051, 5051, 5057, 6543}
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
2005/04/25 Correction to Testing and Adjusting , "Hoist System Pressure" {5136, 5136}
2005/04/25 Correction to Specifications , "Hoist Control Valve" {5136}
793D Off-Highway Truck Engine Oil and Filter - Change
793D Off-Highway Truck Engine Oil Sample - Obtain
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train MID 081 - CID 0626 - FMI 04
793D Off-Highway Truck Engine Oil Level - Check
950K Wheel Loader and 962K Wheel Loader Braking and Hydraulic Fan System Brake Accumulator
C15 and C18 Petroleum Generator Sets Fuel System Secondary Filter - Replace
793D Off-Highway Truck Engine Oil Filter (Oil Renewal System) - Change - If Equipped
3500 Engines Crankcase Pressure (High)
3500 Engines Engine Overspeed
CB-534C Vibratory Compactor Vibratory Amplitude Control - Adjust
966H and 972H Wheel Loaders Machine Systems Brake Control Valve (Parking) - Disassemble
966H and 972H Wheel Loaders Machine Systems Brake Control Valve (Parking) - Assemble
793D Off-Highway Truck Engine Water Pump - Inspect
793D Off-Highway Truck Fuel System Secondary Filter - Replace
AP-1055D and BG-2455D Asphalt Pavers Propel System Piston Pump Flow - Test
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Braking and Hydraulic Fan System Piston Pump (Brake, Hydraulic Fan)
C18 Generator Set Manual Stop Procedure - EMCP 3 (If Equipped)
793D Off-Highway Truck Rear Axle Oil Filter - Replace
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Gear Motor (Hydraulic Fan)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.