Transmission Oil Cooler - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 1     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Attach Tooling (A) and a suitable lifting device to transmission oil cooler (16) and position transmission oil cooler (16). The weight of transmission oil cooler (16) is approximately 50 kg (110 lb).
Show/hide table
Illustration 1 | g01156155 |
- Install bolts (17) to transmission oil cooler (16) .
Show/hide table
Illustration 2 | g01156158 |
- Install bolts (15) .
Show/hide table
Illustration 3 | g01156153 |
- Install plug (14) .
Show/hide table
Illustration 4 | g01156151 |
- Position tube assembly (11) and install bolts (13) .
Show/hide table
Illustration 5 | g01156150 |
- Position tube assembly (11) and install bolts (10). Position tube assembly (9) and install bolts (12) .
Show/hide table
Illustration 6 | g01156148 |
- Position tube assembly (9) and install bolts (7). Connect harness assembly (8) .
Show/hide table
Illustration 7 | g01156146 |
- Install guard assembly (4), clip (5), and bolt (6) .
Show/hide table
Illustration 8 | g01156145 |
- Install hose (2) and tube (3). Tighten clamps (1) .
Show/hide table
Illustration 9 | g01156136 |
- Fill the transmission and the torque converter. Refer to Operation and Maintenance Manual, "Torque Converter and Transmission Oil - Change".
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
End By: Install the rear crankcase guard. Refer to Disassembly and Assembly, "Crankcase Guard - Remove and Install".
Caterpillar Information System:
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0140 - FMI 06
RM-300 Soil Stabilizer Steering Linkage - Lubricate
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Base
PM-201 Cold Planer Access Doors and Covers
2005/03/28 A New Fuel Shield is Available {1252}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0140 - FMI 05
CB-334E and CB-335E Paving Compactors Parking Brake Manual Release
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0140 - FMI 03
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0139 - FMI 06
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Frame and Body Support Pads - Clean/Inspect
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0139 - FMI 05
2005/04/25 An Improved Hose for the Rod End of the Bucket Cylinder is Available {5057}
RM-300 Soil Stabilizer Steering Legs (Rear) - Lubricate
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0354 - FMI 03
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0354 - FMI 05
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0354 - FMI 06
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0355 - FMI 03
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0355 - FMI 05
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0355 - FMI 06
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0358 - FMI 03
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0358 - FMI 05
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System MID 082 - CID 0358 - FMI 06
C15 Generator Set Engines CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C15 Generator Set Engines CID 0102 FMI 04 Boost Pressure Sensor short to ground