RM-300 Reclaimer Mixer Power Train Caterpillar


Final Drive Planetary (Front)

Usage:

RM-300 BWR



Illustration 1g01736498

Reduction ratio ... 110.6:1

The mounting location for the special wheel flange from the face of the mounting flange to the face of the wheel flange ... 211 mm (8.3 inch)

Maximum input speed ... 4025 rpm

Rated output torque ... 40000 N (8990 lb)

Oil capacity ... 4 L (4.2 qt)

Braking torque ... 500 ± 50 N·m (370 ± 37 lb ft)

Minimum brake release pressure ... 1700 kPa (245 psi)

Maximum brake release pressure ... 5000 kPa (725 psi)

Caterpillar Information System:

RM-300 Reclaimer Mixer Power Train Front Axle
RM-300 Reclaimer Mixer Power Train Piston Motor (Rear Propel)
C11 and C13 Engines for Caterpillar Built Machines System Configuration Parameters
RM-300 Reclaimer Mixer Power Train Piston Pump (Rear Propel)
RM-300 Reclaimer Mixer Power Train Flow Divider Valve
RM-300 Reclaimer Mixer Power Train Piston Motor (Front Propel)
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Metering Pump (Steering) - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Piston Pump (Conveyor)
2004/11/01 A New Clip Improves the Fitup and the Installation of the Lines for the Transmission Filter {3004, 3016, 3067}
RM-300 Reclaimer Mixer Power Train Piston Pump (Front Propel)
12M Motor Grader Lifting and Tying Down the Machine
RM-500 Road Reclaimer/Soil Stabilizer Power Train Hydraulic Oil Filter (Charge)
14M Motor Grader Tire Shipping Pressure
14M Motor Grader Transmission and Differential Oil Sample - Obtain
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Piston Motor (Conveyor)
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Water Filter - Remove and Install
3508C, 3512C and 3516C Marine Engines Valve Mechanism Cover - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Position Sensor (Paddle)
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Pilot Hydraulic System
3508B, 3512B and 3516B Generator Set Engines Rocker Shaft and Pushrod - Remove
3508C, 3512C and 3516C Marine Engines Rocker Shaft and Push Rods - Install
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Drag Conveyor
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Hydraulic Cylinder (Offset) - Remove and Install
14M Motor Grader Plate Locations and Film Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.