Usage:
start by:
a) remove service meter
1. Disconnect the harness assemblies firm the adapter assembly.
2. Remove bolts (1) and the clamps to remove adapter assembly (2) from the shutoff drive housing assembly.
3. Remove shaft (3) from the gear assembly on the end of the camshaft and the shutoff drive housing assembly.
INSTALL TACHOMETER DRIVE
1. Install shaft (1) through the shutoff drive housing assembly and into the gear assembly in the end of the camshaft.
2. Put clean engine oil on O-ring seal (2) and install adapter assembly (3) in the shutoff drive assembly. Make sure the shaft of the adapter assembly engages in the groove (slot) on the end of shaft (1). Install the bolts and the clamps to hold the adapter assembly.
3. Connect the harness assemblies to the adapter assembly.
end by:
a) install service meter