446D Backhoe Loader Machine Systems Caterpillar


Pilot Valve (Stabilizer) - Install

Usage:

446D DBL

Installation Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g00765284

  1. Install pilot valve (12) into the console.


    Illustration 2g00765285

  2. Connect harness assemblies (13).


    Illustration 3g00765269

  3. Tighten bolts (11) in order to secure the pilot valve.


    Illustration 4g01091198

  4. Connect heater hose (10).


    Illustration 5g00765260

  5. Connect hose assemblies (9) to the pilot valve.

  6. Install cable assembly (8) and tighten nut (7).

  7. Install retaining ring (6).


    Illustration 6g00765251

  8. Install cover plate (4).


    Illustration 7g00765245

  9. Install boots (5).


    Illustration 8g00765238

  10. Install screws (3) into cover plate (4).

  11. Install knobs (2).


    Illustration 9g00765254

  12. Install cover (1).

Caterpillar Information System:

CB-434D and CB-434D XW Vibratory Compactor Machine Systems Operator Platform - Remove and Install
2004/08/02 Correction to Disassembly and Assembly , "Piston Pump (Brake) - Assemble" {4268, 5070}
2004/08/02 Correction to Disassembly and Assembly , "Piston Pump (Brake) - Assemble" {4268, 5070}
R1300G Load Haul Dump Machine Systems Hydraulic Tank - Assemble
R2900G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Remove
446D Backhoe Loader Machine Systems Pilot Valve (Stabilizer) - Remove
CB-334E and CB-335E Paving Compactors Capacities (Refill)
CB-334E Series II and CB-335E Series II Paving Compactors Stopping the Machine
CB-334E Series II and CB-335E Series II Paving Compactors Engine Starting
416E Backhoe Loader Joystick Control (Loader)
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Remove
446D Backhoe Loader Machine Systems Pilot Valve (Backhoe) - Assemble
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Calibration Error Code List (Caterpillar Monitoring System)
C4.4 (Mech) Industrial Engine Battery - Replace
C4.4 (Mech) Industrial Engine Battery or Battery Cable - Disconnect
797 Off-Highway Truck Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New - 797 LAA Machines Only
797 Off-Highway Truck Engine Components - Rebuild//Replace/Install Reman - 797 LAA Machines Only
CB-334E Series II and CB-335E Series II Paving Compactors Tire Inflation Pressure Adjustment
3508 EUI Engine for Off-Highway Truck/Tractors Water Pump
446D Backhoe Loader Machine Systems Pilot Valve (Stabilizer) - Disassemble
3500 Industrial Engines Auxiliary Water Pump
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Vibratory Valve - Disassemble
446D Backhoe Loader Machine Systems Pilot Valve (Stabilizer) - Assemble
Bench Test Procedure for a 776 and 777 Off-Highway Truck Transmission {3030, 3073} Bench Test Procedure for a 776 and 777 Off-Highway Truck Transmission {3030, 3073}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.