Belt - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 180-3033 | Stands | 4 |
B | 5P-3975 | Rubber Lubricant | 1 |
C | 138-7575 | Link Bracket | 1 |
- Use a suitable lift truck and install belt (4) on the machine, as shown. Install the blocks under the belt. The weight of the belt is approximately
272 kg (600 lb) .Show/hide tableIllustration 2 g01070492 - Apply Tooling (B) to the belt (4) and tire assembly (8).
- Attach a suitable lifting device and Tooling (C) to tire assembly (8). Install tire assembly (8). The weight of the tire assembly is approximately
110 kg (242 lb) .Show/hide tableIllustration 3 g01071291 - Install nuts (7) on tire assembly (8). Tighten nuts (7) to a torque of
450 ± 60 N·m (333 ± 44 lb ft) . Tighten nuts (7) again to a torque of560 ± 60 N·m (415 ± 44 lb ft) .Show/hide tableIllustration 4 g01070487 - Apply Tooling (B) to belt (4) and tire assembly (5).
- Attach a suitable lifting device to tire assembly (5) and install the tire assembly on the machine. The weight of the tire assembly is approximately
51 kg (112 lb) . - Install nuts (6) on tire assembly (5). Tighten nuts (6) to a torque of
420 ± 25 N·m (315 ± 19 lb ft) . - Charge the track tension system. Refer to Testing and Adjusting, "Accumulator - Test and Charge" in order to charge the hydraulic oil pressure in the accumulator.
- Raise the machine and remove the blocks and Tooling (A) from the machine. Lower the machine.
Show/hide table
Illustration 5 g01070486 - Install plate (2) and bolts (3).
Show/hide table
Illustration 6 g01070485 - Install bracket (1) and the bolts on the machine.
Show/hide table
Illustration 1 | g01070806 |
End By:
- Install the tow arm. Refer to Disassembly and Assembly, "Tow Arm - Remove and Install".
Caterpillar Information System:
8-16B and 10-20B Extend-A-Mat Screed Vibratory Group - Disassemble
770 and 772 Off-Highway Truck Fuel System Primary Filter (Water Separator) - Replace
PF-300C and PS-300C Paving Compactors Case and Differential Reducer Support - Lubricate
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Torque Converter
8-16B and 10-20B Extend-A-Mat Screed Power Crown - Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Travel Pedals - Calibrate
10-20B and 8-16B Extend-A-Mat Screed Vibratory Lines Group
8-16B and 10-20B Extend-A-Mat Screed Power Crown - Remove
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Lift Cylinder
784C, 785C and 785C HAA Off-Highway Truck Air System and Brakes Inverter Valve (Secondary Brake)
AS2251 and AS2301 Screeds Screed Troubleshooting
773E Off-Highway Truck Front Wheel Oil Sample - Obtain
2004/05/31 New Lift Cylinder Yokes Have Increased Service Life {7050, 7051}
770 and 772 Off-Highway Truck Fuel System Secondary Filter - Replace
770 and 772 Off-Highway Truck Fuel System Primary Filter (Water Separator) - Drain
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Pressure Reducing Valve (Signal Limiter) - Test and Adjust
AP655F and AP655F L Asphalt Paver Machine Systems Accumulator (Belt Tensioner) - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
10-20B and 8-16B Extend-A-Mat Screed Burner Lines
988H Wheel Loader Steering System Check Valve (Steering) - Secondary Pilot Supply
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 2236 - FMI 03
992G Wheel Loader and 854G Wheel Dozer Power Train MID 081 - CID 0670 - FMI 00
10-20B and 8-16B Extend-A-Mat Screed Spray Down Lines
216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Reference Material