Axle (Front) - Remove and Install - 267B and 277B Multi Terrain Loaders
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 6V-6146     | Load Leveling Beam     | 1     |
B     | 6V-3144     | Chains     | 2     |
Start By:
- Remove the undercarriage. Refer to Disassembly and Assembly, "Undercarriage - Remove".
- Use a suitable lifting device, Tooling (A), and Tooling (B) to support the axle. The weight of the axle is approximately 170 kg (375 lb).
Show/hide table
Illustration 1 | g01061021 |
- Remove bolts (1) .
Show/hide table
Illustration 2 | g01061028 |
- Repeat Step 2 for the other side.
- Lower axle (2) .
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 6V-6146     | Load Leveling Beam     | 1     |
B     | 6V-3144     | Chains     | 2     |
- Use a suitable lifting device, Tooling (A), and Tooling (B) to support the axle. The weight of the axle is approximately 170 kg (375 lb).
Show/hide table
Illustration 3 | g01061021 |
- Install axle (2) into position.
Show/hide table
Illustration 4 | g01061028 |
- Install bolts (1) .
- Repeat Step 2 for the other side.
End By: Install the undercarriage. Refer to Disassembly and Assembly, "Undercarriage - Install".
Caterpillar Information System:
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1404 - FMI 06
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Gear Pump - Remove
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1404 - FMI 05
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1404 - FMI 03
247B and 257B Multi Terrain Loaders Machine Systems Control Manifold and Solenoid (Work Tool Positioner) - If Equipped
988G Wheel Loader Power Train Torque Converter (Lockup) - Assemble
988G Wheel Loader Power Train Torque Converter (Lockup) - Disassemble
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Diverter Valve - Install
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Accessory Drive (Upper Left Hand)
PS-150C Paving Compactor Air Compressor Oil - Check
3408E and 3412E Engines for Caterpillar Built Machines Flash Programming
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1403 - FMI 06
HA770, HA771, HA870 and HA871 Wheel Feller Bunchers Safety Messages
AP1000F Asphalt Paver Machine Systems Final Drive Planetary - Disassemble
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1405 - FMI 03
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1405 - FMI 05
414E, 416E, 420E and 430E Backhoe Loaders MID 039 - CID 1405 - FMI 06
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Pilot Valve - Disassemble
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Pilot Valve - Assemble
216B, 216B2, 226B, 226B2, 232B, 232B2, 242B and 242B2 Skid Steer Loaders Machine Systems Gear Pump - Install
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Hydraulic Tank
966G II and 972G II Wheel Loaders Autoshift Control
770 and 772 Off-Highway Truck Belts - Inspect/Replace
PS-150C Paving Compactor Air Compressor Oil - Change