Body Mounting
Show/hide table
 | |
| Illustration 1 | g00993101 |
Typical left hand side view | |
Show/hide table
 | |
| Illustration 2 | g00625605 |
View A-A | |
Show/hide table
 | |
| Illustration 3 | g00991892 |
View B | |
(1) Pad Assembly
(2) Shim
- Thickness ... 2.0 mm (0.08 inch)
(3) Plate
- Thickness ... 8.0 mm (0.32 inch)
Note: Refer to the Hydraulic System Systems Operation/Testing and Adjusting, "Pad Assembly (Dump Body) - Install and Adjust" for the proper installation of the pad assemblies.
Show/hide table
 | |
| Illustration 4 | g00625608 |
View C-C | |
(4) Use the 8W-2897 Thrust Washer (4.0 mm (0.16 inch)) and use the 9D-3432 Thrust Washer (6.0 mm (0.24 inch)) to center the body on the frame.
Note: Refer to Special Instructions, REHS0563, "Assembly Procedures for 776D Tractors and 777D Off-Highway Trucks", "Use the 130-6841 Body Mounting to Install the Body".
Caterpillar Information System:
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Mixing Chamber - Remove
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Boom Dampening Control - If Equipped
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
CAESultra Modifying an Inclined Plane Design
AP-655C Asphalt Paver Cooling System Coolant Sample (Level 2) - Obtain
AP-655C Asphalt Paver Cooling System Coolant Sample (Level 1) - Obtain
Computer Aided Earthmoving System Basic (CAESBasic) CD550 Display
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Torque Limiting Coupling - Install
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073} Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
CB-434D Paving Compactor Parking Brake Manual Release
CB-434D Paving Compactor Towing the Machine
CB-434D Paving Compactor Steering Frame Lock
TH62, TH63, TH82 and TH83 Telehandlers Lifting Capacities
R2900G Load Haul Dump Machine Electrical System Engine Start
120H and 135H Motor Graders Engine Overheating
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove
120H and 135H Motor Graders Engine Power Loss
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Control Valve (Service) - Remove and Install
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Remove