Seat
Adjust the seat in order to allow full travel of the pedals. Make the seat adjustments when the operator is sitting against the back of the seat. In order to reduce fatigue, periodically readjust the seat and the backrest for additional comfort.
Show/hide table
 | |
| Illustration 1 | g00944526 |
Show/hide table
| Suspension Damping Knob (1) - Turn suspension damping knob (1) in order to change the stiffness of the suspension. Turn suspension damping knob (3) until the weight setting on the dial is the same as the operator's weight. Do not turn the knob past the maximum weight setting or past the minimum weight setting. |
Show/hide table
| Front Seat Cushion Tilt Lever (2) - In order to adjust the seat cushion to the desired angle and height, pull up front seat cushion tilt lever (2). Release the lever in order to lock the seat cushion. |
Show/hide table
| Rear Seat Cushion Tilt Lever (3) - In order to adjust the seat cushion to the desired angle and height, pull up rear seat cushion tilt lever (3). Release the lever in order to lock the seat cushion. |
Show/hide table
| Fore and Aft Lever (4) - Pull up fore and aft lever (4). Hold the lever upward and slide the seat forward or backward to the desired position. Release the lever in order to lock the seat into position. |
Show/hide table
| Seat Recline Lever (5) - In order to move the back of the seat to the desired position, pull up seat recline lever (5). Release the lever in order to lock the back of the seat into position. |
Show/hide table
| Lumbar Support Hand Pump (6) - In order to increase support to the lower back, operate lumbar support hand pump (6). In order to decrease support to the lower back, press the valve button on the hand pump. |
Caterpillar Information System:
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Piston Motor (Drag Conveyor)
3054E Industrial Engine Fan Drive - Remove and Install
R2900 Load Haul Dump Ride Control - If Equipped
TK711, TK721, TK722 and TK732 Track Feller Bunchers Air Conditioning and Heating Control
R1300G Load Haul Dump Braking System General Information
AP-655C and BG-2255C Asphalt Pavers Machine Systems Gear Pump Flow - Test - Vibratory
574B Forwarder Fuel System Water Separator Element - Replace
797 Off-Highway Truck Power Train Pump Drive
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat
Premier Grade and Slope Control System Operation
TK711, TK721, TK722 and TK732 Track Feller Bunchers Engine and Cab Preheat System - If Equipped
2003/02/03 The Cables for the Slope Control Sensor have been Lengthened {7219, 7220}
R1300G Load Haul Dump Braking System System Pressure - Release
Repair Guidelines and Procedures for Mobil-Trac System Belts (MTS) that have Missing or Worn Guide Blocks{4198} Repair Guidelines and Procedures for Mobil-Trac System Belts (MTS) that have Missing or Worn Guide Blocks{4198}
R2900G Load Haul Dump Model Views and Specifications
R2900G Load Haul Dump Safety Signs and Labels
R1300G Load Haul Dump Braking System Brake Accumulator - Test and Charge
R1300G Load Haul Dump Braking System Accumulator Charging Valve (Brake) - Test and Adjust
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System Service Braking System Pressure - Test
3176C and 3406E Engines for Caterpillar Built Machines Analog Sensor Supply Circuit - Test
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Piston Motor (Auger Conveyor)
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Final Drive Planetary (Drum) Oil Sample - Obtain
2002/12/16 The Correct Carriage Bolt for the Wheel and Idler Gp and for the Bogie Wheel Gp {4159, 4192}