Combination Valve (Pilot, Brake, and Steering) - Install
Installation Procedure
- Attach a suitable lifting device onto combination valve (34). Install combination valve (34). The weight of combination valve (34) is approximately 34 kg (75 lb).
Show/hide table
Illustration 1 | g00989539 |
- Install bolt (35) .
- Install bolt (33) .
Show/hide table
Illustration 2 | g00989538 |
- Connect tube assemblies (30) and (31) .
- Connect hose assembly (32) .
- Connect tube assembly (26) and hose assembly (25) .
Show/hide table
Illustration 3 | g00989536 |
- Connect harness assemblies (28), (29), and (27) .
- Connect fitting (22). Connect hose assemblies (21), (23), and (24) .
Show/hide table
Illustration 4 | g00989535 |
- Connect fittings (17), (18), (19), and (20) .
Show/hide table
Illustration 5 | g00989534 |
- Connect hose assemblies (11), (12), (15), and (16). Connect fittings (10), (13), and (14) .
Show/hide table
Illustration 6 | g00989481 |
- Connect harness assemblies (9) .
Show/hide table
Illustration 7 | g00989480 |
- Install panels (6) and (8). Install bolts (5) and (7) .
Show/hide table
Illustration 8 | g00988823 |
- Install grills (3) and (4) .
Show/hide table
Illustration 9 | g00988821 |
- Install panel (2) .
Show/hide table
Illustration 10 | g00988820 |
- Install panel (1) .
Show/hide table
Illustration 11 | g00988818 |
- Fill the hydraulic system with oil. The capacity of the hydraulic system is approximately 300 L (79 US gal). Refer to Operation and Maintenance Manual, "Capacities (Refill)". Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct procedure.
Caterpillar Information System:
533 and 543 Wheel Feller Bunchers Machine Systems Combination Valve (Pilot, Brake, and Steering) - Remove
533 and 543 Wheel Feller Bunchers Machine Systems Solenoid Valve and Manifold (Disc Saw) - Remove and Install
Product Link 151/201 General Information
322C Forest Machine Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
Product Link 151/201 Spare Inputs
3054E Industrial Engine Fuel System - Prime
Product Link 151/201 System Components
574B Forwarder Hydraulic System Boom Tilt Cylinder
Product Link 151/201 Electronic Control Module (ECM)
R2900 Load Haul Dump Lift Arm and Cylinder Bearings - Lubricate
D250E and D300E Articulated Trucks Power Train Final Drive and Wheel
14H Motor Grader Machine Systems Blade - Install
R2900 Load Haul Dump Radiator Core - Clean
D250E and D300E Articulated Trucks Power Train Final Drive and Wheel
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Hydraulic Schematic
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 03
3516B Generator Set Engines with Dynamic Gas Blending Fuel System Inspection
574B Forwarder Hydraulic System Stick Cylinder
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 06
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0291 - FMI 03
R2900 Load Haul Dump Rear Axle Trunnion Bearings - Lubricate
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0291 - FMI 05
574B Forwarder Maintenance Interval Schedule