Spare Inputs
The Product Link has four additional inputs that can be configured in order to monitor switches on the machine. The four digital inputs can be configured by using the Electronic Technician. The inputs can be configured to be normally open or normally grounded. There is a programmable delay time for actuation of these inputs. The Electronic Technician requires you to enter a value for this delay. These inputs can only be used by switches to ground. These inputs cannot be dependent on other machine parameters. Existing machine parameters can be monitored or additional switches can be added. The inputs are listed in the table below:
Show/hide table
Product Link Main Connector Contact (24-pin)     |
Product Link Wiring Harness Connector Contact (8 Pin)     |
Description of the Input     |
16     | 3     | Spare Digital Input 1     |
17     | 4     | Spare Digital Input 2     |
22     | 6     | Spare Digital Input 3     |
23     | 7     | Spare Digital Input 4     |
The following three tables list examples of switches that may be used for the additional inputs.
Show/hide table
Temperature Switches     | ||||||
---|---|---|---|---|---|---|
Caterpillar Part Number     |
Actuation Degrees     |
Deactuation Degrees     |
Port Fitting     |
Tube Length     |
Connector Type     |
Normal State     |
3E-7298     | 21.11 °C (70 °F)     |
12.78 °C (55 °F)     |
3/8-18 NPT     | 31 mm (1.22 inch)     |
2-PIN DT REC     | NC     |
124-8274     | 25 °C (77 °F)     |
15 °C (59 °F)     |
3/4-16 STO     | 17 mm (0.67 inch)     |
2-PIN DT REC     | NC     |
3E-6425     | 38 °C (100.4 °F)     |
27 °C (80.6 °F)     |
3/8-18 NPT     | 31 mm (1.22 inch)     |
2-PIN DT REC     | NC     |
3E-0014     | 38 °C (100.4 °F)     |
27 °C (80.6 °F)     |
1/2-14 NPT     | 35 mm (1.38 inch)     |
2-PIN DT REC     | NC     |
104-7843     | 38 °C (100.4 °F)     |
27 °C (80.6 °F)     |
M16X1.5 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NC     |
3E-6449     | 38 °C (100.4 °F)     |
27 °C (80.6 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NC     |
3E-9350     | 52 °C (125.6 °F)     |
43 °C (109.4 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NC     |
155-8998     | 65 °C (149 °F)     |
21.8 °C (71.24 °F)     |
3/4-16 STO     | 21.8 mm (0.8583 inch)     |
2-PIN DT REC     | NO     |
3E-6240     | 65 °C (149 °F)     |
57 °C (134.6 °F)     |
1/2-14 NPT     | 35 mm (1.3780 inch)     |
2-PIN DT REC     | NC     |
3E-3635     | 65 °C (149 °F)     |
57 °C (134.6 °F)     |
1/2-14 NPT     | 35 mm (1.38 inch)     |
2-PIN DT REC     | NO     |
146-1762     | 68.3 °C (155 °F)     |
59.3 °C (138.74 °F)     |
3/4-16 STO     | 100 mm (3.94 inch)     |
2-PIN DT REC     | NC     |
3E-7714     | 73.89 °C (165. °F)     |
65.56 °C (150 °F)     |
3/4-16 STO     | 17.5 mm (0.69 inch)     |
2-PIN DT REC     | NC     |
107-4927     | 82 °C (179.6 °F)     |
74 °C (165.2 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NO     |
3E-9349     | 88 °C (190 °F)     |
79 °C (174.2 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NC     |
184-7245     | 92 °C (197.6 °F)     |
83 °C (181.4 °F)     |
3/8-18 NPT     | 18 mm (0.71 inch)     |
2-PIN DT REC     | NO     |
177-2313     | 100 °C (212 °F)     |
92 °C (197.6 °F)     |
3/4-16 STO     | 64.3 mm (2.53 inch)     |
2-PIN DT RES     | NC     |
104-3008     | 102 °C (215.6 °F)     |
90 °C (194 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NO     |
131-4135     | 102 °C (215.6 °F)     |
90 °C (194 °F)     |
3/4-16 STO     | 18 mm (0.71 inch)     |
2-PIN DT REC     | NC     |
104-3006     | 107 °C (224.6 °F)     |
97 °C (206.6 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NO     |
114-9235     | 107 °C (224.6 °F)     |
97 °C (206.6 °F)     |
1/2-14 NPT     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NO     |
3E-6451     | 107 °C (224.6 °F)     |
93 °C (199.4 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NC     |
118-5144     | 107 °C (224.6 °F)     |
95 °C (203 °F)     |
3/4-16 STO     | 18 mm (0.71 inch)     |
2-PIN DT REC     | NO     |
177-4599     | 107 °C (224.6 °F)     |
95 °C (203 °F)     |
1/2-14 NPT     | 14.1 mm (0.56 inch)     |
2-PIN DT REC     | NO     |
164-3534     | 107 °C (224.6 °F)     |
93 °C (199.4 °F)     |
3/4-16 STO     | 17.7 mm (0.7 inch)     |
2-PIN DT REC     | NO     |
3E-2028     | 107 °C (224.6 °F)     |
93 °C (199.4 °F)     |
3/8-18 NPT     | 31 mm (1.22 inch)     |
2-PIN DT REC     | NC     |
3E-7504     | 107 °C (224.6 °F)     |
98 °C (208.4 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NO     |
111-3194     | 108 °C (226.4 °F)     |
100 °C (212 °F)     |
1/2-14 NPT     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NO     |
107-4658     | 108 °C (226.4 °F)     |
100 °C (212 °F)     |
1/2-14 NPT     | 17.7 mm (0.7 inch)     |
2-PIN DT REC     | NO     |
130-5453     | 110 °C (230 °F)     |
102 °C (215.6 °F)     |
3/4-16 STO     | 18 mm (0.7087 inch)     |
2-PIN DT REC     | NC     |
130-3015     | 110 °C (230 °F)     |
96 °C (204.8 °F)     |
3/4-16 STO     | 18 mm (0.7087 inch)     |
2-PIN DT REC     | NC     |
177-2314     | 115 °C (239 °F)     |
106 °C (222.8 °F)     |
3/4-16 STO     | 64.3 mm (2.53 inch)     |
2-PIN DT REC     | NC     |
113-8240     | 115 °C (239 °F)     |
106 °C (222.8 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NC     |
155-8999     | 124 °C (255. °F)     |
117 °C (242.6 °F)     |
3/4-16 STO     | 64.3 mm (2.53 inch)     |
2-PIN DT REC     | NC     |
9X-5602     | 125 °C (257 °F)     |
117 °C (242.6 °F)     |
3/4-16 STO     | 64.3 mm (2.53 inch)     |
2-PIN DT REC     | NO     |
104-3007     | 129 °C (264 °F)     |
112 °C (233.6 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NO     |
3E-6453     | 129 °C (264 °F)     |
118 °C (244.4 °F)     |
3/4-16 STO     | 28 mm (1.1 inch)     |
2-PIN DT REC     | NC     |
149-8292     | -.05 °C (31.9 °F)     |
-1.7 °C (28.94 °F)     |
-15.25     | 17.3 mm (0.68 inch)     |
3-PIN DT REC     | NO     |
139-6826     | 65 °C (149 °F)     |
56 °C (132.8 °F)     |
3/4-18 THD     | 100 mm (3.94 inch)     |
3-PIN DT REC     | NC     |
122-2339     | 101.7 °C (215 °F)     |
93.33 °C (200 °F)     |
1/2-14 NPT     | 18 mm (0.71 inch)     |
3-PIN DT REC     | NO     |
142-9804     | 102 °C (215.6 °F)     |
90 °C (194 °F)     |
3/4-16 STO     | 17.7 mm (0.7 inch)     |
3-PIN DT REC     | NO     |
Show/hide table
Pressure Switches     | |||||
Caterpillar Part Number     |
Actuation Pressure     |
Deactuation Pressure     |
Port Fitting     |
Connector Type     |
Normal State     |
168-7557     | 13780 kPa (1998.6 psi)     |
10335 (+/- 689) kPa     | 9/16-18 THD     | 2-PIN DT REC     | NC     |
140-9669     | 1206 kPa (174.92 psi)     |
700 (+/- 103) kPa     | 3/4-16 THD     | 3-PIN DT REC     | NC or NO     |
3E-7675     | 2550 kPa (369.85 psi)     |
1800 (+/- 175) kPa     | 9/16-18 THD     | 3-PIN DT REC     | NC     |
173-7252     | 75 kPa (10.88 psi)     |
35 kPa     | 9/16-18 THD     | 2-PIN DT REC     | NO     |
107-0611     | 93 ± 21 kPa (13.49 ± 3.05 psi)     |
70 ± 21 kPa (10.15 ± 3.05 psi)     |
1/8-27 NPTF THD     | 2-PIN DT REC     | NO     |
3E-2033     | 640 kPa (92.82 psi)     |
530 ± 40 kPa (76.87 ± 5.8psi)     |
1/4-18 NPTF THD     | 2-PIN DT REC     | NO     |
3E-2026     | 60 kPa (8.7 psi)     |
38 ± 20 kPa (5.5 ± 2.9 psi)     |
1/4-18 NPTF THD     | 2-PIN DT REC     | NO     |
115-7103     | 93 ± 20.8 kPa (13.49 ± 3 psi)     |
68.9 ± 20.8 kPa (10 ± 3 psi)     |
9/16-18 THD     | 3-PIN DT REC     | NO or NC     |
Show/hide table
Level Switches     | ||||||
Caterpillar Part Number     |
Connector Type     |
Mounting Position     |
Rating     | Mounting Fitting     |
Wire Length     |
Normal State     |
146-8437     | NONE     | top     | -40-85     | 1/2 NPT     | 169 mm (6.6535 inch)     |
NO or NC     |
140-1385     | DT-2     | top     | -40-125c     | 2 11/-1/2 NPTF     | 31 mm (1.2205 inch)     |
NO     |
141-0374     | DT-3     | side     | -40-85     | 1/8-27 NPTF     | 250 mm (9.8425 inch)     |
    |
145-4552     | DT-3     | side     | -40-85     | 1/8-27 NPTF     | 250 mm (9.8425 inch)     |
    |
156-0069     | DT-4REC     | top     | -40-85     | FLANGE     | 200 mm (7.87 inch)     |
NO     |
174-1821     | NONE     | top     | -40-85     | 1/8-27 NPTF     | 155 mm (6.1 inch)     |
NO     |
1V-2727     | NONE     | top     | -40-85     | 1/8-27 NPTF     | 850 mm (33.46 inch)     |
NO     |
3E-7505     | DT-2     | side     | -40-125c     | 7/8-14 UNF     | 200 mm (7.87 inch)     |
NO or NC     |
5G-0175     | NONE     | top     | -40-85     | 1/8-27 NPTF     | 635 mm (25 inch)     |
NC     |
7C-6930     | NONE     | top     | -40-85     | 1/8-27 NPTF     | 2250 mm (88.58 inch)     |
NC     |
Caterpillar Information System:
3054E Industrial Engine Fuel System - Prime
Product Link 151/201 System Components
574B Forwarder Hydraulic System Boom Tilt Cylinder
Product Link 151/201 Electronic Control Module (ECM)
R2900 Load Haul Dump Lift Arm and Cylinder Bearings - Lubricate
D250E and D300E Articulated Trucks Power Train Final Drive and Wheel
14H Motor Grader Machine Systems Blade - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Bypass Valve (Return Manifold)
120H and 135H Motor Graders Machine Systems Swivel - Assemble
120H and 135H Motor Graders Machine Systems Swivel - Disassemble
D350E and D400E Articulated Trucks Power Train Front Axle
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Piston Pump (Vibratory System)
322C Forest Machine Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
Product Link 151/201 General Information
533 and 543 Wheel Feller Bunchers Machine Systems Solenoid Valve and Manifold (Disc Saw) - Remove and Install
533 and 543 Wheel Feller Bunchers Machine Systems Combination Valve (Pilot, Brake, and Steering) - Remove
533 and 543 Wheel Feller Bunchers Machine Systems Combination Valve (Pilot, Brake, and Steering) - Install
R2900 Load Haul Dump Radiator Core - Clean
D250E and D300E Articulated Trucks Power Train Final Drive and Wheel
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Hydraulic Schematic
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 03
3516B Generator Set Engines with Dynamic Gas Blending Fuel System Inspection
574B Forwarder Hydraulic System Stick Cylinder
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 05