Fuel Transfer Pump
Usage:
(1) Clearance between guide and tappet ... 0.0025 to 0.0101 mm (.0001 to .0004 in)
NOTE: The guide and tappet are a matched set. If one part is worn, a new guide and tappet assembly must be installed.
(2) Bore in sleeve for the piston ... 34.000 ± 0.015 mm (1.3386 ± .0006 in)
Diameter of piston ... 33.972 ± 0.008 mm (1.3375 ± .0003 in)
(3) 7W0134 Spring:
Length under test force ... 33.67 mm (1.326 in)
Test force ... 221 ± 11 N (49.7 ± 2.5 lb)
Free length after test ... 56.1 mm (2.21 in)
Outside diameter ... 27.36 mm (1.08 in)
(4) Fuel inlet port.
(5) Check valves.
(6) Fuel outlet port.
Caterpillar Information System:
3406C DIESEL TRUCK ENGINE Fuel Injection Nozzle And Adapter
3406C DIESEL TRUCK ENGINE Fuel Injecion Lines
3406C DIESEL TRUCK ENGINE Fuel System Identification
3406C DIESEL TRUCK ENGINE Engine Design
3406C DIESEL TRUCK ENGINE Introduction
3306C DIESEL TRUCK ENGINE Measuring Main Bearing Clearances
3306C DIESEL TRUCK ENGINE Piston Cooling Orifices
3306C DIESEL TRUCK ENGINE Rear Power Takeoff
3306C DIESEL TRUCK ENGINE Crankshaft
3306C DIESEL TRUCK ENGINE Crankshaft Main Bearings
3306C DIESEL TRUCK ENGINE Camshaft Bearings
3306C DIESEL TRUCK ENGINE Flywheel Housing
3406C DIESEL TRUCK ENGINE Fuel Injection Pump
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE Governor
3406C DIESEL TRUCK ENGINE Switch Group (Used On Engines With BrakeSaver)
3406C DIESEL TRUCK ENGINE Governor Control Linkage
3406C DIESEL TRUCK ENGINE Ether Starting Aid
3406C DIESEL TRUCK ENGINE Fuel Ratio Control
3406C DIESEL TRUCK ENGINE Primary Fuel Filter
3406C DIESEL TRUCK ENGINE Fuel Filter Base
3406C DIESEL TRUCK ENGINE Governor And Fuel Pump Drive Group (4W4619 Only)(Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE Governor And Fuel Pump Drive Group (Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE Auxiliary Drive Group