Fuel System Identification
Usage:
(1) Location for rack centering pin.
(2) Location for timing pin.
(3) Location of stamped part number and serial number for Fuel Injection Pump and Governor Groups.
See Fuel Setting And Related Information Fiche for the correct fuel injection timing.
Injection sequence (firing order) ... 1-5-3-6-2-4
Rotation of Fuel Pump (when seen from the pump drive end) ... Counterclockwise
Caterpillar Information System:
3406C DIESEL TRUCK ENGINE Engine Design
3406C DIESEL TRUCK ENGINE Introduction
3306C DIESEL TRUCK ENGINE Measuring Main Bearing Clearances
3306C DIESEL TRUCK ENGINE Piston Cooling Orifices
3306C DIESEL TRUCK ENGINE Rear Power Takeoff
3306C DIESEL TRUCK ENGINE Crankshaft
3306C DIESEL TRUCK ENGINE Crankshaft Main Bearings
3306C DIESEL TRUCK ENGINE Camshaft Bearings
3306C DIESEL TRUCK ENGINE Flywheel Housing
3306C DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
3306C DIESEL TRUCK ENGINE Flywheel
3306C DIESEL TRUCK ENGINE Camshaft
3406C DIESEL TRUCK ENGINE Fuel Injecion Lines
3406C DIESEL TRUCK ENGINE Fuel Injection Nozzle And Adapter
3406C DIESEL TRUCK ENGINE Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE Fuel Injection Pump
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE Governor
3406C DIESEL TRUCK ENGINE Switch Group (Used On Engines With BrakeSaver)
3406C DIESEL TRUCK ENGINE Governor Control Linkage
3406C DIESEL TRUCK ENGINE Ether Starting Aid
3406C DIESEL TRUCK ENGINE Fuel Ratio Control
3406C DIESEL TRUCK ENGINE Primary Fuel Filter
3406C DIESEL TRUCK ENGINE Fuel Filter Base