Starter
Usage:
Remove Starter
1. Remove wiring from starter.
2. Fasten a hoist, remove bolts (1) that hold starter. Remove starter from engine. Weight is 75 lb. (34 kg).
Install Starter
1. Put the starter in position on the engine with a hoist.
2. Install bolts that hold starter.
3. Connect wiring to starter.
Caterpillar Information System:
D353 INDUSTRIAL & MARINE ENGINES Alternator
D353 INDUSTRIAL & MARINE ENGINES Attachments Testing And Adjusting
D353 INDUSTRIAL & MARINE ENGINES Systems Operation
D353 INDUSTRIAL & MARINE ENGINES Auxiliary Water Pump (3N6937)
D353 INDUSTRIAL & MARINE ENGINES Raw Water Pump (2N2407)
D353 INDUSTRIAL & MARINE ENGINES Enclosed Clutches
D353 INDUSTRIAL & MARINE ENGINES Mechanical Gauges For Water Temperature
D353 INDUSTRIAL & MARINE ENGINES Mechanical Gauges For Oil Pressure
D353 INDUSTRIAL & MARINE ENGINES Sending Unit For Water Temperature
D353 INDUSTRIAL & MARINE ENGINES Sending Units For Oil Pressure
D353 INDUSTRIAL & MARINE ENGINES Shutoff Valve For Water Temperature
D353 INDUSTRIAL & MARINE ENGINES Contactor Switch For Water Temperature
D353 INDUSTRIAL & MARINE ENGINES Generator
D353 INDUSTRIAL & MARINE ENGINES Radiator
D353 INDUSTRIAL & MARINE ENGINES Fan Drive
D353 INDUSTRIAL & MARINE ENGINES General Instructions
D353 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
D353 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
D353 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
D353 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump Adapter Housing
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing
D353 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
D353 INDUSTRIAL & MARINE ENGINES Governor (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Governor (Later)