PRODUCT SUPPORT PROGRAM FOR CORRECTING THE BOLT HOLE ALIGNMENT ON THE PADS OF THE TRUCK BODIES FOR CERTAIN 773 AND 775 OFF-HIGHWAY TRUCKS
Usage:
SEBE8904-01
September 8, 2004
(Revised September 2004)
U-262
A-182
D-200
O-228
Show/hide table
| before
or after failure |
PRODUCT SUPPORT PROGRAM FOR CORRECTING THE BOLT HOLE ALIGNMENT ON THE PADS OF THE TRUCK BODIES FOR CERTAIN 773 AND 775 OFF-HIGHWAY TRUCKS |
|
| 7258 |
PS41671
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
NOTE: This Revised Service Letter replaces the September 8, 2004 Service Letter. Changes have been made to the Rework Illustrations.
Termination Date
September 30, 2006PROBLEM
The bolt holes that hold body mount pads on the 773 and 775 new design truck bodies will not allow full bolt head contact of the mount pad and shims.AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 773 Truck Bodies |
|
| 775 Truck Bodies |
|
Location of Serial Number Plate
PARTS NEEDED
Show/hide table
|
|
|
|
|
|
|
WELD NUT |
ACTION REQUIRED
Refer to the attached illustrations and relocate the bolt holes.SERVICE CLAIM ALLOWANCES
Show/hide table
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
0-Up Months |
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Attach. (1-Rework Illustrations)
REWORK ILLUSTRATIONS
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR IMPROVING ACCELERATION ON 525HP C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR IMPROVING ACCELERATION ON 525HP C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 3126E ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 3126E ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR IN THE ALTERNATOR ON CERTAIN 3116 AND 3126E TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR IN THE ALTERNATOR ON CERTAIN 3116 AND 3126E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPAIRING THE FUEL CONTROL ASSEMBLY ON SOME 3161 GOVERNORS PRODUCT IMPROVEMENT PROGRAM FOR REPAIRING THE FUEL CONTROL ASSEMBLY ON SOME 3161 GOVERNORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE FILES ON CERTAIN C10, C12, C15, AND C16 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE FILES ON CERTAIN C10, C12, C15, AND C16 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE TURBO OIL SUPPLY LINES ON CERTAIN C15 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE TURBO OIL SUPPLY LINES ON CERTAIN C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING A CONTROL GROUP AND RECALIBRATING THE RACK POSITION SENSOR ON CERTAIN 3512 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING A CONTROL GROUP AND RECALIBRATING THE RACK POSITION SENSOR ON CERTAIN 3512 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN C7 AND C9 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN C7 AND C9 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES EQUIPPED WITH COMPRESSION BRAKES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES EQUIPPED WITH COMPRESSION BRAKES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A BROKEN CRANKSHAFT ON CERTAIN 3406E TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPAIRING A BROKEN CRANKSHAFT ON CERTAIN 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN 3500B ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN 3500B ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 225-8577, 225-8578, AND 225-8579 BEARINGS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 225-8577, 225-8578, AND 225-8579 BEARINGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONVERTER MUFFLER HANGER CLAMPS ON CERTAIN 3126E TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONVERTER MUFFLER HANGER CLAMPS ON CERTAIN 3126E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR PREVENTING POSSIBLE FUEL OR OIL LINE FAILURES ON CERTAIN C12 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR PREVENTING POSSIBLE FUEL OR OIL LINE FAILURES ON CERTAIN C12 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 AND C16 TRUCK ENGINES EQUIPPED WITH JACOBS 340D COMPRESSION BRAKES PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 AND C16 TRUCK ENGINES EQUIPPED WITH JACOBS 340D COMPRESSION BRAKES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 185-6134 STUDS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 185-6134 STUDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 9M6193 CARTRIDGE SPRINGS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 9M6193 CARTRIDGE SPRINGS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FLASH FILES FOR CERTAIN C15 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FLASH FILES FOR CERTAIN C15 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH PRESSURE OIL PUMP AND / OR REFLASHING SOFTWARE ON CERTAIN C9 ENGINES IN RV APPLICATIONS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH PRESSURE OIL PUMP AND / OR REFLASHING SOFTWARE ON CERTAIN C9 ENGINES IN RV APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL PRESSURE SENSOR ON CERTAIN C7 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL PRESSURE SENSOR ON CERTAIN C7 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING VIBRATION ISOLATORS FOR POWER DISTIBUTION PANELS ON CERTAIN 3500B SERIES II MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING VIBRATION ISOLATORS FOR POWER DISTIBUTION PANELS ON CERTAIN 3500B SERIES II MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN ASV RC85 AND RC100 MACHINES PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN ASV RC85 AND RC100 MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE ACCESSORY DRIVE TENSIONER ON CERTAIN C15 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE ACCESSORY DRIVE TENSIONER ON CERTAIN C15 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN 3126E ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN 3126E ENGINES