Cylinder Liners
Usage:
For Installation:
a. Put clean engine oil on the liner bore surfaces of the cylinder block and on the rubber seals installed on the lower part of the liner.
b. Put the filler band completely in clean engine oil for a moment.
c. Install filler band (1) in the groove under the liner flange, without delay.
d. Install the liner in the block immediately, before expansion of the filler band.
(1) Filler Band.
(2) O-Ring Seals.
(3) Thickness of flange on liner ... 8.890 ± 0.020 mm (.3500 ± .0008 in)
"Use again" minimum thickness ... 8.870 mm (.3492 in)
(4) Bore in liner (new) ... 137.185 ± 0.025 mm (5.4010 ± .0010 in)
NOTE: Make reference to Guideline For Reusable Parts; Pistons And Cylinder Liners, SEBF8049 and SEBF8068.
Caterpillar Information System:
3406C GENERATOR SET ENGINE Cylinder Block
3406C GENERATOR SET ENGINE Aftercooler
3406C GENERATOR SET ENGINE Water Temperature Regulator
3406C GENERATOR SET ENGINE Belt Tension Chart
3406C GENERATOR SET ENGINE Water Pump
3406C GENERATOR SET ENGINE Oil Pan
3406C GENERATOR SET ENGINE Engine Oil Pump One Section Gear
3406C GENERATOR SET ENGINE Engine Oil Filter
3406C GENERATOR SET ENGINE Exhaust Manifold Shield
3406C GENERATOR SET ENGINE Exhaust Manifold
3406C GENERATOR SET ENGINE Turbochargers
3406C GENERATOR SET ENGINE Cylinder Head
3406C GENERATOR SET ENGINE Cylinder Liner Projection
3406C GENERATOR SET ENGINE Pistons And Rings
3406C GENERATOR SET ENGINE Connecting Rods
3406C GENERATOR SET ENGINE Connecting Rod And Main Bearing Journals
3406C GENERATOR SET ENGINE Crankshaft
3406C GENERATOR SET ENGINE Flywheel Housing Cover
3406C GENERATOR SET ENGINE Flywheel Housing
3406C GENERATOR SET ENGINE Flywheel
3406C GENERATOR SET ENGINE Service Meters
3406C GENERATOR SET ENGINE Alternator And Regulator
3406C GENERATOR SET ENGINE Electric Starting Motor
3406C GENERATOR SET ENGINE Systems Operation