Aftercooler
Usage:
Typical Example
(1) Bolts that hold the cover and core support plate.
Tighten the bolts to a torque of ... 25 ± 6 N·m (18 ± 5 lb ft)
After the engine is operated, again tighten the bolts to a torque of ... 25 ± 6 N·m (18 ± 5 lb ft)
(2) Put clean engine oil or glycerin on all O-ring seals and in their bores at assembly.
NOTE: Tighten all bolts (1) through the core support plate before bolts (3), through the water line adapters, are tightened.
(3) Tighten the bolts and nuts to a torque of ... 25 ± 6 N·m (18 ± 5 lb ft)
(4) Bolts that hold the water line adapters.
(5) Put 9S3263 Thread Lock on the bolt threads at assembly.
Caterpillar Information System:
3406C GENERATOR SET ENGINE Water Temperature Regulator
3406C GENERATOR SET ENGINE Belt Tension Chart
3406C GENERATOR SET ENGINE Water Pump
3406C GENERATOR SET ENGINE Oil Pan
3406C GENERATOR SET ENGINE Engine Oil Pump One Section Gear
3406C GENERATOR SET ENGINE Engine Oil Filter
3406C GENERATOR SET ENGINE Exhaust Manifold Shield
3406C GENERATOR SET ENGINE Exhaust Manifold
3406C GENERATOR SET ENGINE Turbochargers
3406C GENERATOR SET ENGINE Cylinder Head
3406C GENERATOR SET ENGINE Valve Rocker Arms, Lifters And Bridges
3406C GENERATOR SET ENGINE Valves
3406C GENERATOR SET ENGINE Cylinder Block
3406C GENERATOR SET ENGINE Cylinder Liners
3406C GENERATOR SET ENGINE Cylinder Liner Projection
3406C GENERATOR SET ENGINE Pistons And Rings
3406C GENERATOR SET ENGINE Connecting Rods
3406C GENERATOR SET ENGINE Connecting Rod And Main Bearing Journals
3406C GENERATOR SET ENGINE Crankshaft
3406C GENERATOR SET ENGINE Flywheel Housing Cover
3406C GENERATOR SET ENGINE Flywheel Housing
3406C GENERATOR SET ENGINE Flywheel
3406C GENERATOR SET ENGINE Service Meters
3406C GENERATOR SET ENGINE Alternator And Regulator