3512C and 3516C Industrial Engines Caterpillar


Electronic Control Module

Usage:

3512C MLM





Illustration 1g03838242

Table 1
Specification for 176-7503 Engine Electronic Control Gp    
Item     Qty     Part     Specification Description    
1     6     103-1733 Screw     Torque to
2.15 ± 0.25 N·m (19.03 ± 2.21 lb in).    
2     7     103-1734 Screw     Torque to
2.15 ± 0.25 N·m (19.03 ± 2.21 lb in).    
3     3     -     Torque to
2.82 ± 0.23 N·m (24.96 ± 2.04 lb in).    
4     2     126-7574 Screw     Torque to
2.15 ± 0.25 N·m (19.03 ± 2.21 lb in).    
5     4     102-2383 Screw     Torque to
2.15 ± 0.25 N·m (19.03 ± 2.21 lb in).    
6     -     -     Before assembly, apply Loctite 5900 around the connectors to protect gasket from pressure wash.    
7     1     4J-7533 O-Ring Seal     Before assembly, lubricate the seal with glycerin or approved equivalent.    
E     -     -     Before assembly, apply sealant to the cover within the area shown.    

Caterpillar Information System:

3512C and 3516C Industrial Engines Electronic Control Module
352F OEM Excavator Based Specialty Solutions Before Operation
PM3516 Power Modules Fire Prevention and Explosion Prevention
C3.3B and C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter Regeneration Does Not Occur
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200} Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
C9.3 Marine Engine Air Starting Motor - Remove and Install
New Bellow Assemblies Are Used on Certain 3612 and C280-12 Marine and Petroleum Engines {1059, 1061} New Bellow Assemblies Are Used on Certain 3612 and C280-12 Marine and Petroleum Engines {1059, 1061}
3512C and 3516C Industrial Engines Jacket Water Heater Mount
3512E Engines for Well Stimulation Pumps Exhaust Elbow
3500B Engines for Caterpillar Built Power Modules Alternator Mounting
C7 and C9 Industrial Engines Intake Manifold Air Temperature Is High
C7 and C9 Industrial Engines Fuel Pressure Is Low
3512C and 3516C Industrial Engines Radiator
C9.3 Marine Engine Fuel Filter Base - Remove and Install - Left-Hand Duplex
C4.4 and C7.1 Engines General Information
C9.3 Marine Engine Housing (Front) - Remove and Install
3516E Engines for 793D Off-Highway Trucks Electronic Service Tools
3516E Engines for 793D Off-Highway Trucks System Overview
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
G3606 and G3608 Engines Turbocharger - Install
3524B and C175 Engines for Off-Highway Truck/Tractors Cylinder Block
3512C and 3516C Industrial Engines Air Inlet and Exhaust Lines
C4.4 and C7.1 Engines Component Location
C4.4 and C7.1 Engines Electrical Connectors
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.