Temperature Sensor (DPF Inlet)
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | Bostik Pure Nickel Anti-Seize Compound |
1 |
Show/hide table
| |
| Illustration 1 | g03126438 |
|
Typical example | |
Note: Use tooling (A) in order to lubricate the thread of temperature sensor (1).
(1) Tighten the temperature sensor to the following torque. ...
Caterpillar Information System:
2012/07/19 Water Pump Operation on C7.1, C6.6, and C4.4 Engines {1361}
3412 Generator Set Engines Cylinder Head Valves
C13, C15, and C18 Tier 4 Final Engines Air Inlet Elbow
C18 Marine Engine Engine Oil Sample - Obtain
CX48-P2300 Petroleum Transmission Power Train Electronic Control System General Information
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Connector Locations
C32 Marine Engines Closed Crankcase Ventilation (CCV) System
CEM Locomotive Aftertreatment Exhaust Outlet Nitrogen Oxide Sensor - Replace
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Service Tools
2012/07/13 A New Replacement Gas Regulator Is Available for G342, G343, G353, G379, G398, and G399 Engines {1000, 1270}
CEM Locomotive Aftertreatment Exhaust Inlet Nitrogen Oxide Sensor - Replace
CEM Locomotive Aftertreatment Diesel Exhaust Fluid Nozzle - Inspect/Clean
UPS 250 and UPS 300 Uninterruptible Power Supplies Acronyms
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Symbols
UPS 250 and UPS 300 Uninterruptible Power Supplies Operating Parameters - Set
794 AC Off-Highway Truck Final Drive Oil Level - Check
C7.1 Industrial Engine Temperature Sensor (Exhaust)
C7.1 Industrial Engine Injector (Diesel Exhaust Fluid)
C7.1 Industrial Engine Nitrogen Oxide Sensor
UPS 250 and UPS 300 Uninterruptible Power Supplies Getting Started
UPS 250 and UPS 300 Uninterruptible Power Supplies Menus
C32 Marine Engines Turbocharger - Inspect
UPS 250 and UPS 300 Uninterruptible Power Supplies Using Computer Software
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254} Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}