794 AC Off-Highway Truck Caterpillar


Final Drive Oil Level - Check

Usage:

794 AC HRT

  • Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".


    Illustration 1g03129586

  • Use sight gauges (1) in order to check the oil level in each final drive.

  • If necessary, add oil.

    Note: When the machine is parked on a level surface and when final drive drain plug (2) is in the lowest position, final drive filler plug (3) will be at the proper oil level.

    Note: Before oil is added, the final drives might need repositioning in order to place the drain plug in the lowest position.

  • Caterpillar Information System:

    UPS 250 and UPS 300 Uninterruptible Power Supplies Operating Parameters - Set
    UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Symbols
    UPS 250 and UPS 300 Uninterruptible Power Supplies Acronyms
    C7.1 Industrial Engine Temperature Sensor (DPF Inlet)
    2012/07/19 Water Pump Operation on C7.1, C6.6, and C4.4 Engines {1361}
    3412 Generator Set Engines Cylinder Head Valves
    C13, C15, and C18 Tier 4 Final Engines Air Inlet Elbow
    C18 Marine Engine Engine Oil Sample - Obtain
    CX48-P2300 Petroleum Transmission Power Train Electronic Control System General Information
    CX48-P2300 Petroleum Transmission Power Train Electronic Control System Connector Locations
    C32 Marine Engines Closed Crankcase Ventilation (CCV) System
    CEM Locomotive Aftertreatment Exhaust Outlet Nitrogen Oxide Sensor - Replace
    C7.1 Industrial Engine Temperature Sensor (Exhaust)
    C7.1 Industrial Engine Injector (Diesel Exhaust Fluid)
    C7.1 Industrial Engine Nitrogen Oxide Sensor
    UPS 250 and UPS 300 Uninterruptible Power Supplies Getting Started
    UPS 250 and UPS 300 Uninterruptible Power Supplies Menus
    C32 Marine Engines Turbocharger - Inspect
    UPS 250 and UPS 300 Uninterruptible Power Supplies Using Computer Software
    Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254} Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
    2012/10/04 A New Rocker Arm Assembly Is Used in Certain C11 and C13 Commercial Engines {1123}
    C13 Tier 4 Final Engines Solenoid Valve
    G3500 Engines Cylinder Head
    CX48-P2300 Petroleum Transmission Power Train Electronic Control System Cat Data Link - Test
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.