Fuel Injector
Show/hide table
Illustration 1 | g03117876 |
Show/hide table
Specification for 384-4705 Fuel Injection Pump Gp | |||
Item | Qty | Part | Specification Description |
Prior to installation of the fuel injector group, lubricate the bore in the cylinder head with 1P-0808 Multipurpose Grease. Use injector clamp (3) to press the injector into the bore. Do not tap on the top surface of the injector. | |||
1 | 1 | 361-9354 Fuel Injection Valve Assembly | Use the following procedure in order to tighten the fuel injection valve assembly:
Before assembly, lubricate the bore and the threads with 1P-0808 Multipurpose Grease. 1. Tighten the valve assembly to 2. Turn to reach the final turn angle of 19 ± 1 degrees. 3. Again, tighten to |
2 | 1 | 7F-8698 Bolt | Torque to |
A | - | - | Timing dimension is |
3 | 1 | 230-9456 Unit Injector Nozzle | Use the following procedure in order to tighten the unit injector nozzle:
1. Tighten the unit injector nozzle to 2. Turn to reach the final turn angle of 58 ± 2 degrees. 3. Again, tighten to |
Caterpillar Information System:
3500C Marine Engines Fuel Filter
Inspection of Fuel Injection Pumps on 3054C, C3.3, C4.4 (Mech), and C7.1 (Mech) Engines {1251} Inspection of Fuel Injection Pumps on 3054C, C3.3, C4.4 (Mech), and C7.1 (Mech) Engines {1251}
3516B Generator Set with Dynamic Gas Blending Turbocharger
C32 Marine Engine Acceleration Is Poor or Throttle Response Is Poor
C32 Marine Engines General Information
G3300 Engines Alternator and Fan Belts - Inspect/Adjust/Replace
G3300 Engines Maintenance Interval Schedule - Standby
G3300 Engines Maintenance Interval Schedule - Turbocharged Aftercooled
G3300 Engines Maintenance Interval Schedule - Naturally Aspirated
2012/08/03 A New Redundant ECM Cross-Over Harness Is Used for C175-16 Petroleum Engines {1408, 4460, 7426}
2012/09/11 Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E}
2012/08/21 Improved Aftercooler Lines Components are Available for Certain C280 and 3600 Engines {1063}
3512B and 3512C Petroleum Generator Set Engines Exhaust Manifold
3512B and 3512C Petroleum Generator Set Engines Turbocharger
3500B and 3500C Marine Engines Exhaust Manifold
3524B and C175 Engines for Off-Highway Truck/Tractors Cylinder Head
3500B High Displacement Locomotive Engines Fuel Injector
3516C Generator Set Engines Engine Oil Lines
3500B Generator Set Engines Turbocharger
2012/10/11 A Summary of Updates for Type 2 C175-16 Engines {1000}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System General Information
374F Excavator Machine Systems Joystick and Pedal - Calibrate
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Lockup Clutch Function
CX48-P2300 Petroleum Transmission Power Train Electronic Control System System Protection Functions