Cylinder Head Valves
Show/hide table
图 1 | g03488976 |
典型示例 |
Show/hide table
技术规格 - 380-5798 缸盖总成和 376-0393 缸盖总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 4 | 316-5976 弹簧 | 测试力下的长度为 测试力为 测试后的自由长度为 |
2 | 4 | 316-5977 弹簧 | 测试力下的长度为 测试力为 测试后的自由长度为 |
3 | 2 | 316-5980 气门杆密封件 | 将阀杆密封件安装到进气阀上。 |
4 | 2 | 316-5981 垫圈 | 将垫圈安装到排气阀上。 |
A | - | - | 从缸盖顶部到气门导管顶部的高度为 |
5 | 2 | 197-6995 气门导管 | 安装后排气门导管的孔径为 |
6 | 2 | 133-9306 气门导管 | 安装后进气门导管的孔径为 |
7 | 2 | 443-2712 排气门 | 组装前,用清洁的发动机机油涂覆排气阀杆。
气门杆直径 (B) 为 气门直径 (D) 为 端面角度为 45.60 ± 0.25 度。 |
8 | 2 | 210-2542 进气阀 | 组装前,用清洁的发动机机油涂覆进气阀杆。
气门杆直径 (C) 为 气门直径 (E) 为 端面角度为 19.40 ± 0.25 度。 |
9 | 2 | 289-9745 气门座镶圈 | 排气门座镶圈的直径为 缸盖的缸径为 端面角度为 45.00 ± 0.25 度。 |
10 | 2 | 183-8809 气门座镶圈 | 进气门座镶圈的直径为 缸盖的缸径为 端面角度为 20.00 ± 0.25 度。 |
Caterpillar Information System:
C7.1 Industrial Engine Configuration Parameters
3500 Industrial Engines Cylinder Head
2012/06/19 Solution for Acquiring Missing Cat® ECM Replacement Files for Certain Generator Sets {1920, 7620}
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Remove
2012/06/15 New Clamping Method for Oil Cooler Supply Tubes for Certain 3512C and 3516C Engines {1307, 1308}
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Install
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258} Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
3500 Engines Camshaft
3500 Engines Camshaft
C7.1 Industrial Engine Fuel Filter (In-Line) - Replace
C7.1 Industrial Engine Soot Antenna
3500 Industrial Engines Cylinder Head Valves
3500B High Displacement Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Turbocharger Oil Lines
3500B High Displacement Turbocharger Oil Lines
3516B Engine Model View Illustrations
797F and 797F XQ Off-Highway Trucks Machine Systems Ladder - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Front) - Remove and Install