Cylinder Head Valves
Show/hide table
图 1 | g03111305 |
Show/hide table
技术规格 - 380-5797 缸盖总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 2 | 210-2542 进气阀 | 组装前,用清洁的发动机机油涂覆进气阀杆。
气门杆直径 (C) 为 气门头直径 (E) 为 端面角度为 19.40 ± 0.25 度。 |
2 | 2 | 194-4897 排气门 | 组装前,用清洁的发动机机油涂覆排气阀杆。
气门杆直径 (D) 为 气门头直径 (F) 为 端面角度为 45.6 ± 0.25 度。 |
3 | 4 | 316-5976 弹簧 | 测试力下的长度为 测试力为 测试后的自由长度为 |
4 | 4 | 316-5977 弹簧 | 测试力下的长度为 测试力为 测试后的自由长度为 |
5 | 2 | 316-5980 气门杆密封件 | 将阀杆密封件安装到进气阀上。 |
6 | 2 | 316-5981 垫圈 | 将垫圈安装到排气阀上。 |
7 | 2 | 133-9306 气门导管 | 安装前进气门导管的孔径为 |
8 | 2 | 197-6995 气门导管 | 安装前排气门导管的孔径为 |
9 | 2 | 130-2607 气门座镶圈 | 缸盖上气阀座镶圈的深度 (G) 为 进气门座镶圈的直径为 缸盖的缸径为 端面角度为 20.00 ± 0.25 度。 |
10 | 2 | 130-2608 气门座镶圈 | 缸盖上气阀座镶圈的深度 (H) 为 排气门座镶圈的直径为 缸盖的缸径为 端面角度为 45.00 ± 0.25 度。 |
A | 1 | 239-0689 定位销 | 从缸盖顶部到定位销顶部的高度为 |
B | - | - | 从缸盖顶部到气门导管顶部的高度为 |
Caterpillar Information System:
C7.1 Industrial Engine Soot Antenna
C7.1 Industrial Engine Fuel Filter (In-Line) - Replace
3500C Marine Engines Cylinder Head Valves
C7.1 Industrial Engine Configuration Parameters
3500 Industrial Engines Cylinder Head
2012/06/19 Solution for Acquiring Missing Cat® ECM Replacement Files for Certain Generator Sets {1920, 7620}
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Remove
2012/06/15 New Clamping Method for Oil Cooler Supply Tubes for Certain 3512C and 3516C Engines {1307, 1308}
C280-12 and C280–16 Marine Engines Fuel Filter Housings - Install
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
2012/07/06 Improved Engine Oil Pump Lines Are Now Used on Certain C9 Engines {1304, 1307}
3500B High Displacement Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Turbocharger Oil Lines
3500B High Displacement Turbocharger Oil Lines
3516B Engine Model View Illustrations
797F and 797F XQ Off-Highway Trucks Machine Systems Ladder - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Front) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Rear) - Remove and Install
C7.1 Industrial Engine Turbocharger - Inspect
2014/03/07 New Exhaust Elbows and Bellows Are Used for the Turbine Inlets on Certain G3516B and G3520B Engines {1052, 1059}