Bucket Linkage
Show/hide table
Illustration 1 | g03715224 |
Typical example |
Show/hide table
Specification for 278-9293 Bucket Linkage Gp and 385-3232 Bucket Linkage Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
- | All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the pin bores and the bushings before assembly. After you assemble the bushings coat all the bores and the bushings with 5P-0960 Grease Cartridge. | ||
1 | 1 | 248-7820 Pin | Diameter is |
2 | 2 | 248-7835 Bushing | Bore before assembly is Installation depth is |
3 | 4 | 235-7679 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lips of the lip type seals do not extend beyond the face of the boss. |
4 | 2 | 229-1092 Bushing | Install the bushing in the bore so that the part number of the bushing is facing outward.
Bore before assembly is Installation depth is |
5 | 2 | 248-7836 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lips of the lip type seals do not extend beyond the face of the boss. |
6 | 1 | 451-2183 Nut | Position the nut (7) to the distance of Torque to |
7 | 1 | 451-2183 Nut | |
8 | 2 | 086-0523 Pin | Diameter is |
9 | 6 | 096-4876 Nut | Torque to |
10 | - | - | During assembly of the linkage group on the machine, rotate the rod end of the bucket cylinder in order to position the grease fitting away from the stick. |
11 | 1 | 7I-6843 Pin | Diameter is |
Caterpillar Information System:
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Ethernet Interface
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Modem
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738} Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
3512C and 3516C Marine Propulsion Engines Event Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Cylinder Block
3512C and 3516C Marine Propulsion Engines Diagnostic Trouble Codes
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pump
2011/12/23 A New Routing Is Used on Fuel Injector Wiring Harnesses on C9.3 Industrial Engines {1290, 1408, 1900}
3516C and C175-16 Engines Selective Catalytic Reduction SCR Module Differential Pressure Is Low
3516C and C175-16 Engines Selective Catalytic Reduction SCR Module Differential Pressure Is High
2011/12/23 A New Bolt and Washers Are Used in the Damper Guard Group of Certain C18 Marine Engines {1205, 7553}
2011/12/23 Proper Measurement for O-Ring Seal Land of Water-Cooled Exhaust Elbows on Certain Commercial Engines {1061}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579} Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
3516B Engine for the MT4400D Off-Highway Truck Water Lines
3512C and 3516C Industrial Engines Turbocharger Oil Lines
3516B Engine for the MT4400D Off-Highway Truck Turbocharger Oil Lines
3512C and 3516C Industrial Engines Turbocharger
3512B and 3512C Petroleum Generator Set Engines Engine Speed Sensor
3512E Tier 4 Final Engines for Land Electric Drilling Switches
3516B Engine for the MT4400D Off-Highway Truck Refrigerant Compressor
2012/01/06 New Sealing Method Between Turbocharger and Exhaust Elbow on Certain C6.6 Engines {1052, 1061}
C2.2 Generator Set Enclosures{7263, 7274} C2.2 Generator Set Enclosures{7263, 7274}
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Fire Prevention and Explosion Prevention
3516C Generator Set Engines Power Is Intermittently Low or Power Cutout Is Intermittent