Engine Oil Filter, Oil Filter Base and Oil Cooler - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 185-3630     | 带式扳手组件     | 1     |
B     | 154-9731     | 螺纹锁固胶     | -     |
Show/hide table
热的冷却液、蒸汽和碱会造成人身伤害。 在工作温度下,发动机冷却液是热的而且处在压力下。 散热器和所有到加热器的管路或发动机中都有热的冷却液或蒸汽。 与它们的任何接触都会造成严重烫伤。 只有当发动机停机且冷却系统压力盖已经冷却到可以徒手触摸时,再慢慢拆下冷却系统压力盖以释放压力。 不要试图在冷却液还热的时候去拧紧软管接头,软管会脱落而造成灼伤。 警告:冷却系统的冷却液添加剂含碱。 应避免它与皮肤和眼睛接触。 |
- 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"以了解正确的排放和加注步骤。
- 将电源断路开关转至断开位置。
- 使用工具 (A) 拆下机油滤清器 (4) 。
Show/hide table
图 1 | g02211793 |
- 断开软管组件 (1) 。 拆下管组件 (3) 。
- 拆下阀和适配器组件 (2) 。
- 拆下螺栓 (5) 、机油滤清器底座 (6) 和密封垫。
Show/hide table
图 2 | g01814676 |
- 拆下发动机机油冷却器 (7) 和密封垫。
Show/hide table
图 3 | g01814677 |
- 从机油滤清器底座 (6) 上拆下螺塞 (8) 、O 形密封圈 (9) 、弹簧 (10) 和阀 (11) 。
Show/hide table
图 4 | g01814678 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下双头螺栓 (12) 。
- 从机油滤清器底座 (6) 上拆下螺塞 (16) 、O 形密封圈 (15) 、弹簧 (14) 和阀 (13) 。
安装步骤
- 按与拆卸相反的顺序安装发动机机油滤清器 (4) 、机油滤清器底座 (6) 和机油冷却器 (7) 。
- 将工具 (B) 涂抹到双头螺栓 (12) 的螺纹上并达到长度 10.00 ± 1.50 mm (0.394 ± 0.059 in)。 将双头螺栓 (12) 拧紧至扭矩为 68 ± 7 N·m (50 ± 5 lb ft)。
- 检查发动机机油油位。 请参阅操作和保养手册, "发动机机油油位 - 检查"。
Caterpillar Information System:
Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120} Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120}
Installation Instructions for 361-6833 Lighting Group Warning Beacon Kit {1431, 1431} Installation Instructions for 361-6833 Lighting Group Warning Beacon Kit {1431, 1431}
D7E Track-Type Tractor Engine Supplement Engine Electronic Control - Remove and Install
D11T, D8T and D9T Track-Type Tractors VIMSTM 3G / Product Link System Schematic
D11T Track-Type Tractor MID 113 - CID 0168 - FMI 04
C4.2 and C6.4 Engines for Caterpillar Built Machines Air in Fuel - Test
Caterpillar Monitoring System Service Tools
D11T Track-Type Tractor MID 113 - CID 0168 - FMI 03
D11T Track-Type Tractor MID 113 - CID 0070 - FMI 04
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600} NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
D11T Track-Type Tractor MID 113 - CID 0070 - FMI 03
D11T Track-Type Tractor MID 113 - CID 0041 - FMI 04
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Service Tools
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Implement Movement Without Request
2010/08/25 A New Routing Is Now Available for the Valve Harness Assembly (Seat Air Compressor) on Certain Caterpillar Machines {7312, 731S, 7324}
D11T, D8T and D9T Track-Type Tractors VIMSTM 3G / Product Link Electronic Control Module (ECM) - Flash Program
Underground Articulated Truck Suspension System Suspension Accumulator
Installation Instructions for 361-6834 Lighting Group Kit {1429, 1434, 1434} Installation Instructions for 361-6834 Lighting Group Kit {1429, 1434, 1434}
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Implement Droops Before Raising
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Location of Components (Electrical System)
D11T Track-Type Tractor MID 113 - CID 0177 - FMI 03
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems General Information
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Features
D11T Track-Type Tractor MID 113 - CID 0177 - FMI 04