- Load Haul Dump:
- R1700G (S/N: SBR1-UP)
- Load Haul Dump:
- R1700G (S/N: 8XZ1-UP)
- Load Haul Dump:
- R1700II (S/N: 4LZ132-UP)
The information in this module has changed. Replace the information with the following information.
Tilt Cylinder
Illustration 1 | g01229544 |
(1) Apply 7M-7456 Bearing Mount Compound to the seal groove prior to assembly. Lubricate the sealing lip lightly with the lubricant being sealed.
(2) Lubricate the threads prior to installing the nut.
- Torque for the nut ... 18000 ± 800 N·m (13280 ± 590 lb ft)
(3) Diameter of a new piston ... 253 ± 0.03 mm (9.96 ± 0.0012 inch)
(4) Bore of a new cylinder tube ... 254.0 + 0.13 - 0.05 mm (10.000 + 0.005 - 0.002 inch)
(5) Diameter of a new rod ... 139.64 ± 0.038 mm (5.4980 ± 0.0015 inch)
(6) Bore of a new cylinder head ... 139.98 ± 0.03 mm (5.511 ± 0.0012 inch)
(7) Apply 169-5464 Quick Cure Primer and then apply 155-0695 Thread Lock Compound to the threads of the bolts prior to assembly.
- Torque for the eight bolts ... 1800 ± 200 N·m (1400 ± 150 lb ft)
(8) Apply 7M-7456 Bearing Mount Compound to the seal groove prior to assembly. Lubricate the sealing lip lightly with the lubricant being sealed.
(9) Apply 169-5464 Quick Cure Primer and then apply 155-0695 Thread Lock Compound to the threads of the bolts prior to assembly.
- Torque for the six bolts ... 100 ± 15 N·m (75 ± 11 lb ft)
(10) (11) Lubricate the sealing lips with a small amount of the lubricant that is being sealed.
(12) Apply 7M-7456 Bearing Mount Compound to the wiper seal groove prior to assembly. Lubricate the sealing lips with a small amount of the lubricant that is being sealed.