Water Pump
Show/hide table
 | |
| 图 1 | g02119055 |
(1) 螺栓组件的扭矩 ... 30 ± 7 N·m (266 ± 62 lb in)
Show/hide table
 | |
| 图 2 | g02114776 |
剖面 A-A (2) 轴组件 | |
(B) 泵叶轮与水泵壳体组件的间隙 ... 0.75 mm (0.030 in)
(3) 冲洗轴承和水泵壳体组件。
(C) 水泵密封组件的工作高度 ... 12.19 mm (0.480 in)
(D) 从轮毂 (4) 前表面到水泵壳体组件表面的距离 ... 151.8 ± 0.3 mm (6.0 ± 0.01 in)
Caterpillar Information System:
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553} Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head Valves
C15 and C18 Industrial Engines Precooler - Remove and Install - For Series Turbo Applications
C-10, C-12 and C-15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000} Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000}
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C13 Industrial Engines Fuel Pressure Sensor
C27 and C32 Engines for Caterpillar Built Machines Camshaft
2010/08/17 New Turbochargers Are Used on Some C18 Industrial Engines {1052, 1053}
G3500 Generator Sets Model View Illustrations
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing Temperature - Test/Record
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install - For Series Turbocharger Applications
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Disassemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Assemble
C27 and C32 Tier 4 Engines Pressure Sensor (NRS Differential)
2010/03/09 A New Screw Is Available for the Rocker Arm Assemblies of Some Truck Engines {1123}
2010/03/12 A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}
2010/03/10 A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}
C13 Industrial Engines Pressure Sensor (NRS Absolute)
2010/10/08 A Slave Relay Should be Used for Customer Connections to EMCP 3 On Certain Generator Sets {4490}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258} Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
2010/03/22 A Procedure to Properly Torque the Fittings on the Fuel Manifold Group on Certain C13 and C15 On-Highway Truck Engines Is Available {1274, 1380, 1702}