Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
Show/hide table
Illustration 1 | g02117299 |
Note: Before installing the sensor into the Diesel Particulate Filter (DPF), apply the anti-seize compound to the threads of the sensor. Also apply anti-seize compound to the threads that the sensor will be installed into. Use Never Seez® Bostik "Pure Nickel Special" anti-seize compound. This anti-seize compound can be ordered from the following companies.
P & C Industrial Products734-426-1400
Manufactures Warehouse Supply
847-632-1340
Show/hide table
Never Seez® Bostik "Pure Nickel Special" anti-seize compound | ||
Stock Number | Description | Amount |
NSN -165 | Flat top | 1 lb |
NSN -8 | Flat top | 8 lb |
NSBT - 8N | Brush top | 8 oz |
NSBT - 16N | Brush top | 1 lb |
NSN - 42B | Pail | 42 lb |
NSN - 130B | Drum | 130 lb |
NSN - 425B | Drum | 425 lb |
(1) Final installation torque for the temperature sensor ...
Supply voltage ... 5 ± 0.25 VDC
Note: Do not connect to battery voltage.
Operating temperature ...
Caterpillar Information System:
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000} Installation and Initial Start-Up Procedure for G3508B A3 Engines{1000}
C13, C15, and C18 Tier 4 Final Engines Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C13 Industrial Engines Fuel Pressure Sensor
C27 and C32 Engines for Caterpillar Built Machines Camshaft
2010/08/17 New Turbochargers Are Used on Some C18 Industrial Engines {1052, 1053}
G3500 Generator Sets Model View Illustrations
C7.1 Industrial Engine and Generator Set Ether Starting Aid - Test
G3512E Generator Set Engine Fuel Metering Valve - Test
G3500 Generator Sets Additional Messages
2010/03/02 New Settings Are Now Used For EMCP 3 On Certain Generator Sets {4490}
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C-10, C-12 and C-15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
C15 and C18 Industrial Engines Precooler - Remove and Install - For Series Turbo Applications
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head Valves
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553} Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
C11 and C13 Engines Water Pump
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Bearing Temperature - Test/Record
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install - For Series Turbocharger Applications
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Disassemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Assemble
C27 and C32 Tier 4 Engines Pressure Sensor (NRS Differential)
2010/03/09 A New Screw Is Available for the Rocker Arm Assemblies of Some Truck Engines {1123}
2010/03/12 A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}