Position Sensor (Hoist Control)
Show/hide table
图 1 | g01928655 |
举倾控制位置传感器的位置 |
举倾控制位置传感器位于操作员中央操作台。 举倾控制位置传感器是一个脉宽调制位置传感器。 举倾控制位置传感器向动力传动系电子控制模块(动力传动系 ECM)发送占空比信号。
动力传动系 ECM 利用这些信号通电激励举倾控制阀上相应的举倾比例电磁阀。 举倾比例电磁阀将移动举倾控制阀中的滑阀。 这会将机油传送到举倾油缸以便移动卸载车斗。
来自举倾控制位置传感器的信号也用于将变速箱换入空档。 当举倾控制位置传感器处于提升位置时,动力传动系 ECM 只允许换入前进速度位置或空档位置。 动力传动系 ECM 将不允许换入后退位置,直到举倾控制位置传感器被移出提升位置,且变速箱换档杆处于空档位置。
注: 如果机器在后退位置且举倾控制传感器处于提升位置,动力传动系 ECM 会将变速箱换入空档。 机器会保持在空档位置,直到举倾控制被移入保持或浮动位置,且变速箱控制已经循环经过空档。
Caterpillar Information System:
G3304B and G3306B Engines Aftercooler - Remove
2009/05/25 Correction to Schematics for the Control Group {1408}
Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480} Instructions For Converting Uninterruptible Power Supplys With Hall Effect Probes To The G3.5 Load Cell{4480}
UPS Bearing Type I to G3.5 Conversion{4480} UPS Bearing Type I to G3.5 Conversion{4480}
C13 Engine for Combat and Tactical Vehicles Belt Tensioner
C9.3 Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install - Return
3500B Engines Air Shutoff
3500 Engines Exhaust Manifold
2009/07/13 Improved Diagnostic Procedures Are Now Used to Determine Proper Belt Alignment on C9 Marine Engines {1358, 1397}
C9.3 Industrial Engine Turbocharger
797F and 797F XQ Off-Highway Trucks Machine Systems Hoist Cylinder - Remove and Install
The Loss of Fuel Prime in Some C32 Engines{1250, 1280} The Loss of Fuel Prime in Some C32 Engines{1250, 1280}
C13 Engine for Combat and Tactical Vehicles Electronic Control Module
G3304B and G3306B Engines Aftercooler - Install
C13 Engine for Combat and Tactical Vehicles Electronic Control Wiring Group
G3304B and G3306B Engines Turbocharger - Remove
G3304B and G3306B Engines Turbocharger - Install
3406E, C-10, C-12, C-15, C-16 Truck Engines Crankshaft End Play - Test
G3304B and G3306B Engines CAN Data Link - Test
3508C, 3512C, and 3516C Locomotive Engines CAN Data Link - Test
C9.3 Tier 4 Final Engines Exhaust Gas Valve (NRS)
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission Diagnostic Code List
G3304B and G3306B Engines Turbocharger - Disassemble
G3304B and G3306B Engines Turbocharger - Assemble