Turbocharger
Show/hide table
Illustration 1 | g01616117 |
Note: Before assembly, lubricate the threads and the bearing surface of the bolts (1) and the bolts (2) with 4C-5599 Anti-Seize Compound .
(1) Use the following procedure in order to tighten the flange nuts:
- Align the joint in order to get all four flange nuts started on the bolts.
- Snug bolts for the joint
- Tighten the bolts in a crisscross pattern to 54 ± 5 N·m (40 ± 4 lb ft).
- Again, tighten the bolts in a crisscross pattern to 54 ± 5 N·m (40 ± 4 lb ft).
Show/hide table
Illustration 2 | g01623793 |
Typical example |
Use the following procedure in order to tighten the bolts for the half flange (2) :
- Tighten bolts (3) in any sequence to 54 ± 5 N·m (40 ± 4 lb ft).
- Tighten bolts (4) in any sequence to 54 ± 5 N·m (40 ± 4 lb ft).
Tighten the bolts for the compressor housing to 40 ± 2 N·m (30 ± 1 lb ft).
Tighten the bolts for the turbine housing to 40 ± 2 N·m (30 ± 1 lb ft).
Caterpillar Information System:
3500C Marine Propulsion Engines Diagnostic Capabilities
C6.6 Marine Generator Set Glossary of Electronic Control Terms
C6.6 Marine Generator Set Engine Oil Cooler - Inspect
C27 and C32 Industrial and Petroleum Engines Alternator and Regulator
C6.6 Marine Generator Set Air Inlet and Exhaust System
3500B Locomotive Engines Turbocharger
C6.6 Marine Generator Set Fuel Injection
C6.6 Marine Generator Set V-Belt - Test
C6.6 Marine Generator Set Vibration Damper - Check
C6.6 Marine Generator Set Cooling System - Test
C6.6 Marine Generator Set Cooling System - Check - Overheating
C6.6 Marine Generator Set Power Sources
3500C Marine Propulsion Engines Coolant Temperature Is High
3500C Marine Propulsion Engines Coolant Temperature Is Low
3500C Marine Propulsion Engines Crankcase Pressure Is High
3500C Marine Propulsion Engines Engine Overspeeds
3500C Marine Propulsion Engines Engine Top Speed Is Not Obtained
C6.6 Marine Generator Set Fuel Injection Pump
3500B Locomotive Engines Turbocharger
3500C Marine Propulsion Engines Exhaust Temperature Is High
G3412C, G3508, G3512 and G3516 Engines Status Control Module Starting Motor Remains Engaged
C6.6 Marine Generator Set Fuel Injection Nozzles
3500C Marine Propulsion Engines Fuel Filter Is Restricted
C6.6 Marine Generator Set Electronic Control System