Control Valve (Auxiliary)(Loader)(Pilot Operated)
Show/hide table
Illustration 1 | g01623157 |
(1) 308-2880 Relief Valve Gp
- Pressure setting for the relief valve group at a flow rate of 5 L/min (1.3 US gpm) ... 24500 to 25000 kPa (3550 to 3650 psi)
- Torque for the relief valve group ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(2) Torque for the plug ... 60 N·m (44 lb ft)
(3) Torque for the control valve plug group ... 32.5 ± 2.5 N·m (24 ± 2 lb ft)
(4) Torque for eight bolts ... 10 N·m (90 lb in)
(5) Torque for the check valve group ... 30 N·m (22 lb ft)
Caterpillar Information System:
160M Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Install
C6.6 Engines For Caterpillar Built Machines CID 0549 FMI 02
C6.6 Engines For Caterpillar Built Machines CID 0267 FMI 04
R1600G Load Haul Dump Autodig System - If Equipped
621H, 623H, and 627H Wheel Tractor-Scrapers Hydraulic and Steering System Flow Switch (Secondary Steering)
R1600G Load Haul Dump Fire Suppression System (Foam) - If Equipped
R1600G Load Haul Dump Fire Suppression System - Check - If Equipped
2007/05/28 New Wheel is Used on Landfill Compactor. {4206}
160M Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Remove
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Tilt)(Pilot Operated)
450E Backhoe Loader Machine Systems Boom Cylinder - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Tilt)(Pilot Operated)
16M Motor Grader Machine Systems Ripper - Remove
16M Motor Grader Machine Systems Ripper - Install
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Before Roading the Machine
16M Motor Grader Machine Systems Solenoid Valve and Manifold (Hydraulic Fan) - Remove and Install
160M Motor Grader Engine Supplement Engine - Remove
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
160M Motor Grader Engine Supplement Engine - Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
2007/05/28 A new Hose is Used for the Inlet to the Turbocharger {1051, 1054}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
770 and 772 Off-Highway Truck/Tractors Pin (Body Retaining) - Remove and Install