Some Backhoe Loaders with Front Windows May Crack the Front Window{7301, 7310}
- Backhoe Loader:
- 416E (S/N: SHA116-537)
- 420E (S/N: HLS210-1018; KMW150-446)
- 430E (S/N: DDT220-267; EAT230-339)
- 420E (S/N: HLS210-1018; KMW150-446)
Some 416E, 420E and 430E machines with front windows may crack the front window due to glass interfering with weldments on the cab.
Show/hide table
Illustration 1 | g01277131 |
Show/hide table
Illustration 2 | g01277125 |
(A) Location of a possible Stressed Area (B) Location of a possible Stressed Area (1) Front Window (4) Lower glass |
Remove the front window (1).
Show/hide table
Illustration 3 | g01276597 |
Excess weld on plate (A) Location of a Stressed Area (2) Excess weld (2A) Weld splatter |
Grind the excess weld (2) flush with the plate (3) in order to eliminate interference with the front window. Also, grind any weld splatter (2A). If necessary, repeat the process at location (B).
Show/hide table
Illustration 4 | g01277107 |
The plate after grinding |
Install a new front window (1).
Caterpillar Information System:
Field Installation of 284-8542 Backhoe Lines Gp (Kit, Field Conversion){5057} Field Installation of 284-8542 Backhoe Lines Gp (Kit, Field Conversion){5057}
587R Pipelayer Machine Systems Fast Fill Fuel Adapter
2006/08/14 Caterpillar Factory Commissioning Services {1000, 4450, 7000, 7002}
587R Pipelayer Machine Systems Fast Fill Fuel Adapter
3176C Engines for Caterpillar Built Machines Decelerator Position Sensor Circuit - Test
572R Series 2, 583T, 587T, PL83 and PL87 Pipelayers Fast Fill Fuel System - 583T PL83 587T PL87 And 572R II
2006/11/13 Troubleshooting the Injection Actuation Pressure on Unit Injector Hydraulic Pumps {1714}
583T Pipelayer Machine Systems Fast Fill Fuel Adapter
3176C Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
583T Pipelayer Machine Systems Fast Fill Fuel Adapter
793D Off-Highway Truck Power Train Drive Shaft (Main) - Remove and Install
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) Machine Type - Configure - Machine Settings
Starting and Charging Systems Main Relay and/or Breaker Test Description
Starting and Charging Systems Coolant Switch Test Description
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0597 - FMI 14
3176C Engines for Caterpillar Built Machines Crank Without Inject Circuit - Test
587R Pipelayer Machine Systems Fast Fill Fuel Troubleshooting
587T Pipelayer Machine Systems Fast Fill Fuel Adapter
2006/08/07 Change in Torque Specification for "T-Bolt" Clamps That Are Used on Radiator Hoses {1351}
C175-16 and C175-20 Engines for Off-Highway Trucks Cylinder Block - Type 1
587T Pipelayer Machine Systems Fast Fill Fuel Adapter
2006/06/12 The Routing of the Cable Assembly for the Starter Is Improved {1408}
CB-534D and CB-564D Asphalt Compactors Lifting and Tying Down the Machine
Starting and Charging Systems Start Aid Switch/Solenoid Test Description