Camshaft - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-7638 | Magnetic Holding Tool | 12 |
B | 136-4632 | Timing Pin | 1 |
139-7063 | Timing Pin Adapter | 1 |
- Carefully install camshaft (6) in the cylinder block.
- Orient timing mark (3) with the corresponding timing mark on the crankshaft idler gear.
- Orient timing mark (5) with the corresponding timing mark on the high-pressure fuel pump gear.
Note: Older versions will not have timing mark (5).
- Install thrust plate (4).
- If necessary, rotate camshaft gear (1) in order to access thrust plate (4). Install bolts (2).
- Ensure that the No. 1 cylinder is at the top center compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
- Ensure that the timing marks on the following gears are aligned: the camshaft drive gear, the idler gear and the crankshaft gear.
- Remove Tooling (B).
Show/hide table
Illustration 2 g01265762 - Remove Tooling (A) from the valve lifters.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 1 | g03746985 |
End By:
- Install the front cover.
- Install the rocker arms and the pushrods.
- Install the vibration damper and the pulley.
Caterpillar Information System:
C280 Marine Auxiliary Engines Analog Sensor (Active)
C7 and C9 On-Highway Engines Configuration Parameters
C7 and C9 On-Highway Engines Data Link Parameters
3500 Engines Exhaust Manifold
3500 Engines Exhaust Manifold
G3600 Engines Camshaft Bearings
Loose Accumulators on Variable Valve Actuators for C11, C13, and C15 Engines{1130} Loose Accumulators on Variable Valve Actuators for C11, C13, and C15 Engines{1130}
C280 Marine Auxiliary Engines Air Shutoff System
G3600 Engines Camshaft Bearings
Power Module Aftercooler Water Line Rework{1063, 1071} Power Module Aftercooler Water Line Rework{1063, 1071}
3508 EUI Engine for Off-Highway Truck/Tractors Engine Speed Sensor
3512C Engine for 785D Off-Highway Truck/Tractors Camshaft
3126B Marine Engine Aftercooler - Assemble
Variable Valve Actuator Quill Failures and Pressure Sensor Faults 385-01 or 283-07 on C15 Engines{1130, 1925} Variable Valve Actuator Quill Failures and Pressure Sensor Faults 385-01 or 283-07 on C15 Engines{1130, 1925}
C280 Marine Auxiliary Engines CAN Data Link
G3600 Engines Housing (Rear)
C280 Marine Auxiliary Engines Cat Data Link
G3600 Engines Vibration Damper - Single
2006/10/02 Troubleshooting the Injection Actuation Pressure on Unit Injector Hydraulic Pumps {1714}
2006/08/14 Caterpillar Factory Commissioning Services {1000, 4450, 7000, 7002}
C9 On-highway Engine Fan Drive Mounting Group
C280 Marine Auxiliary Engines Electrical Power Supply
C175-16 and C175-20 Engines for Off-Highway Trucks Cylinder Block - Type 1
G3600 Engines Alternator and Regulator