A Improved Gasket is Now Available {1151, 1162}
- Engine:
- C-10 (S/N: MBJ3086-5241; 2PN1984-7341; 3CS29276-29442; 8YS1-7768)
- C-12 (S/N: CPD299-2710; MBL11915-19644; 1YN1456-12844; 2KS60457-98357; 9NS20526-20543)
A new gasket is now available. The improved 262-8382 Gasket is a direct replacement of the 211-2822 Gasket. The 211-2822 Gasket has been cancelled. The improved gasket has a raised bead that improves resistance to leaks.
Caterpillar Information System:
Supplemental Parts and Service Information for the C18 Marine Propulsion Engine {1901, 7470} Supplemental Parts and Service Information for the C18 Marine Propulsion Engine {1901, 7470}
2005/07/18 A Improved Gasket is Now Available {1151, 1162}
3126B Petroleum Engine Air Shutoff - Install
784C and 785C Off-Highway Truck/Tractors Match Tire Size - Dual Tire Configuration
3126B Petroleum Engine Air Shutoff - Assemble
3126B Petroleum Engine Air Shutoff - Disassemble
2005/07/01 Diagnostic Codes for the Fuel Pressure Sensor {1718, 7620}
C6.6 Engines for Caterpillar Built Machines Crankshaft Seals
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Assemble
3456 Generator Sets Manual Stop Procedure
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Device Bus Network - Modbus Communications
3456 Generator Sets Starting the Engine - EMCP 3 (If Equipped)
C7 and C9 On-Highway Engines Engine Rating Parameters
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0590 - FMI 12
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0700 - FMI 02
G3500 Engines Model View Illustrations
C7 and C9 Marine Engines Engine Cranks but Will Not Start
C13 and C15 On-highway Engines ECM Memory - Test
3126B Generator Set Engine CID 0164 FMI 02 Injector Actuation Pressure signal erratic
TH48-E80 Oil/Gas Transmission Transmission Hydraulic Control - Remove
TH48-E80 Oil/Gas Transmission Transmission Hydraulic Control - Install
Guidelines for Installation and Maintenance of Sea Water Heat Exchangers, Strainers, and Fuel Coolers{1379, 3319} Guidelines for Installation and Maintenance of Sea Water Heat Exchangers, Strainers, and Fuel Coolers{1379, 3319}
C32 Petroleum Engines Water Temperature Regulator - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0702 - FMI 02