3500 Petroleum Engines and Petroleum Generator Sets Caterpillar


Specifications

Usage:

3516C 9F4

表 1
3500C 发动机技术规范    
项目     3508C 发动机     3512C 发动机     3516C 发动机    
额定转速(rpm)     1200     1200     1200    
怠速转速(rpm)     600 到 1250    
气缸和布置     60 度 V 型 8 缸    
缸径    
170 mm (6.7 in)    
冲程    
190 mm (7.5 in)    

215 mm (8.4 in)    
类型     4 冲程循环    
压缩比     14.7:1    
进气方式     涡轮增压式    
涡轮增压空气的冷却方法     SCAC    
每缸排量    
4.3 L (263 in3)    

4.8 L (298 in3)    
总排量    
34.5 L (2105 in3)    

51.8 L (3158 in3)    

76.8 L (4687 in 3)    
旋向(飞轮端)     标准旋向为逆时针方向。    
燃油     请参考本操作和维护手册, "加注容量和建议"(保养部分)。    
燃油喷射方法     电子单体喷油器    
起动方法     空气起动马达    
排气系统中的设计背压    
2.5 kPa (10 in 的 H2O)    
最大允许背压    
6.7 kPa (27 in 的 H2O)    
最大允许背压 (1)     如果排气背压超过
15 kPa (60 in 的 H2O),请参阅 SIS 网站 TMI 中的增补数据。 进入性能数据 EM0875,了解有关背压升高影响的更多信息。    
最大进气阻力    
6.2 kPa (25 in 的 H2O)    
空气滤清器     单滤芯    
( 1 ) 发动机序列号 PES1-Up



图 1g00739600

3508C发动机

(A) 进气门

(B) 排气门

(C) 飞轮




图 2g00749769

3512C 发动机

(A) 进气门

(B) 排气门

(C) 飞轮




图 3g00308357

3516C 发动机

(A) 进气阀

(B) 排气阀

(C) 飞轮

Caterpillar Information System:

12M Motor Grader Shipping the Machine
3412E Petroleum Engine ECM/Personality Module - Test
3500B High Displacement Generator Set Engines Programmable System Parameters
3500 Petroleum Engines and Petroleum Generator Sets Model View Illustrations
C27 and C32 Industrial and Petroleum Engines E539 High Intake Manifold Air Temperature
Oil Volumes for Track Link Assemblies {4169} Oil Volumes for Track Link Assemblies {4169}
2005/04/18 An Improved Rear Gear Group is Available for Reverse Engine Rotation {1204, 1206}
C27 and C32 Engines for Caterpillar Built Machines E361 High Engine Coolant Temperature
C27 and C32 Industrial and Petroleum Engines E360 Low Engine Oil Pressure
2005/01/31 Oversized Valve Guides are Available {1104}
2005/01/24 Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
C7 and C9 Marine Engines E059 Low Engine Coolant Level Warning
3500 Petroleum Engines and Petroleum Generator Sets Refill Capacities and Recommendations
C11 and C13 Engines Engine Oil Level Switch - If Equipped
3516C HD Petroleum Well Service Engine Reference Material
2005/01/31 Improved Exhaust Bellows {1061}
C9 Urban Transit Bus Engine Coolant Temperature Sensor - Remove and Install
C9 Urban Transit Bus Engine Idler Pulley - Remove and Install
2005/01/31 New Injector Seals are Now Used {1290}
2005/01/31 Improved Lifters are Now Used {1102, 1121, 1123}
3500 Petroleum Engines and Petroleum Generator Sets Control Panel
C7 and C9 Engines for Caterpillar Built Machines E096 High Fuel Pressure
2005/01/31 The Connections for Engine Lockout Must be Wired in order to Start the Engine {1450}
PM820, PM822, and PM825 Cold Planer Roading the Machine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.