Safety Signs and Labels
There may be several specific warning signs on your Generator Set Start Module. The descriptions of the warning signs are reviewed in this section. Please become familiar with all warning signs.
Ensure that all of the warning signs are legible. Clean the warning signs or replace the warning signs if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the warning signs. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the warning signs. The warning signs that are loosened could drop off the Generator Set Start Module.
Replace any warning sign that is damaged or missing. If a warning sign is attached to part of the Generator Set Start Module that is replaced, install a new warning sign on the replacement part. Your Caterpillar dealer can provide new warning signs.
Show/hide table
Illustration 1 | g01070939 |
Caution Wait for Five Minutes after Disconnecting All Sources of Power Before Removing the Cover or the Panels of the Enclosure. |
Show/hide table
Illustration 2 | g01070940 |
Hazard (Energy) |
Show/hide table
Illustration 3 | g01070941 |
AC Disconnect Only |
Show/hide table
Illustration 4 | g01070942 |
Risk of Electric Shock and Electrical Energy |
Show/hide table
Illustration 5 | g01070943 |
Caution Refer to the inside of the Door for Information. |
Show/hide table
Illustration 6 | g01070944 |
Caution Surfaces are Hot. Do Not Touch the Surfaces. |
Caterpillar Information System:
Generator Set Start Module (AC Input) Product Drawings - Internal Schematic
Generator Set Start Module (AC Input) Product Drawings - Interconnection Diagram
Generator Set Start Module (AC Input) Electrical Connections
Generator Set Start Module (AC Input) Mounting
Generator Set Start Module (AC Input) Site Preparation
Generator Set Start Module (AC Input) Specifications
Generator Set Start Module (AC Input) System Description
2004/05/03 Improved Service Meter Used {7478}
3406E, C-10 and C-12 On-highway Engines Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Petroleum Engines Flywheel Housing
2004/05/01 New Turbocharger Supply Lines are Available {1052, 1071}
3406E, C-10 and C-12 On-highway Engines Engine Pressure Sensor Open or Short Circuit - Test
G3520C and G3520E Generator Set Engines Throttle Control Valve - Remove
G3520C and G3520E Generator Set Engines Throttle Control Valve - Install
C27 and C32 Engines for Caterpillar Built Machines Turbocharger
2004/05/01 UPS Flywheel Bearing Serviceability {7551}
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Remove
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Install
Generator Set Start Module (AC Input) Acronyms
Generator Set Start Module (AC Input) Symbols
3406E, C-10 and C-12 On-highway Engines Engine Speed/Timing Sensor Circuit - Test
Generator Set Start Module (AC Input) Model View Illustrations
Generator Set Start Module (AC Input) Troubleshooting