Throttle Control Valve - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7573     | 连杆支架     | 4     |
- 将工具 (A) 和适当的起吊设备连接到弯头 (6) 和油门 (7) 上。
Show/hide table
图 1 | g01070970 |
注: 使用工具 (A) 和适当的起吊设备支撑起弯头 (6) 。
- 定位弯头 (6) 、油门 (7) 和密封垫。 油门的重要约为 54 kg (120 lb)。
- 安装螺栓 (5) 。
- 安装螺栓 (2) 和 (3) 。
Show/hide table
图 2 | g01070961 |
- 安装螺栓 (4) 。
- 连接线束组件 (1) 。
Show/hide table
图 3 | g01070966 |
- 接通气体供给。
Caterpillar Information System:
G3520C and G3520E Generator Set Engines Throttle Control Valve - Remove
Generator Set Start Module (AC Input) Safety Signs and Labels
Generator Set Start Module (AC Input) Product Drawings - Internal Schematic
Generator Set Start Module (AC Input) Product Drawings - Interconnection Diagram
Generator Set Start Module (AC Input) Electrical Connections
Generator Set Start Module (AC Input) Mounting
Generator Set Start Module (AC Input) Site Preparation
Generator Set Start Module (AC Input) Specifications
Generator Set Start Module (AC Input) System Description
2004/05/03 Improved Service Meter Used {7478}
3406E, C-10 and C-12 On-highway Engines Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Petroleum Engines Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines Turbocharger
2004/05/01 UPS Flywheel Bearing Serviceability {7551}
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Remove
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Install
Generator Set Start Module (AC Input) Acronyms
Generator Set Start Module (AC Input) Symbols
3406E, C-10 and C-12 On-highway Engines Engine Speed/Timing Sensor Circuit - Test
Generator Set Start Module (AC Input) Model View Illustrations
Generator Set Start Module (AC Input) Troubleshooting
3176C and 3196 Engines for Caterpillar Built Machines Flywheel
2004/08/01 The Oil Level Gauge (Dipstick) has been Improved {1326}