Water Pump
Show/hide table
| |
| Illustration 1 | g00873033 |
(1) O-Ring seal
Lubricate the bore with glycerin or an approved equivalent.
(2) Seal assembly
Use the following procedure in order to install the seal assembly.
- Use clean water as a lubricant to aid in assembly.
- Use the installation tool and hand pressure to seat the ceramic ring and the rubber seal in the pump housing.
- Remove the spring from the seal assembly.
- Use the installation tool and hand pressure to press the seal assembly on the shaft until the seal faces make light contact.
- Install the spring.
(3) Oil seal
Use the following guidelines in order to install the oil seal:
- Install the seal dry.
- Install the seal within two minutes of the removal of the seal from the shipping sleeve.
- Install the seal by using a slow motion and even motion.
- Use the correct installation tool.
Show/hide table
| NOTICE |
|---|
|
Improper handling can damage the ceramic seal. If the shaft is bumped during installation, the ceramic seal that is internal to the pump may crack leading to a coolant leak from the weep hole. Caution should be taken during installation not to make hard contact to the shaft. The pump should also be completely inserted during installation. Do not allow the shaft to support the weight of the pump during installation. |
(4) Nut
- Torque ...
140 ± 27 N·m (103 ± 20 lb ft)
Caterpillar Information System:
G3500 Engines Pressure Sensor - Oil Pressure
2002/03/11 Change to Disassembly and Assembly Manual {1225}
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Travel Motor and Mounting
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Travel Motor and Mounting
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Travel Motor and Mounting
Alternator - Delco 27SI Field Winding - Test
3618 Engine Contactor - Adjust
2002/03/01 Change to Disassembly and Assembly Manual {1225}
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Travel Counterbalance Valve
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Travel Counterbalance Valve
3618 Engine Engine Speed Switch - Calibrate
2002/03/01 Recommendations For Maintenance And Operation For Caterpillar Ignition Systems (CIS) {1550}
Alternator - Delco 27SI Stator - Test
3500 Industrial Engine Attachments Duplex Oil Filter
3500 Generator Set Engines Auxiliary Water Pump
2002/03/01 Software Available For Programming Allen-Bradley Programmable Logic Controller (PLC) {1000, 7620}
Alternator - Delco 27SI Diode Assembly - Test
3524B and C175 Engines for Off-Highway Truck/Tractors Auxiliary Water Pump
Alternator - Delco 27SI Rectifier - Test
3500 Industrial Engine Attachments Cooling System
3500B Engines Auxiliary Water Pump
2002/03/01 A New Spark Plug Extender Is Used In The Ignition Systems For The Engine Supervisory System (ESS) {1550}
3500 Engines Power Take-Off Clutch
797F Off-Highway Truck Steering System Piston Pump (Steering) Pressure - Test and Adjust