G3500B Engines Caterpillar


Exhaust Manifold

Usage:

G3516B 7EZ




Illustration 1g00979458

(1) Bolt

Lubricate the bearing surfaces of the bolt, the washers, and the nut and lubricate the threads of the bolt and the nut with 4C-5597 Anti-Seize Compound.

Simultaneously tighten the diagonally opposite bolts to the following torque. ... 55 ± 5 N·m (41 ± 4 lb ft)
Tighten the bolts to the following torque again. ... 55 ± 5 N·m (41 ± 4 lb ft)

(2) Taperlock stud

Lubricate the stud's threads with 4C-5597 Anti-Seize Compound.

Torque ... 35 ± 5 N·m (26 ± 4 lb ft)

(3) Bolt

Torque ... 55 ± 5 N·m (41 ± 4 lb ft)

(4) Bolt

Lubricate the bearing surfaces of the bolt and the washer and lubricate the bolt threads with 4C-5597 Anti-Seize Compound.

Torque ... 55 ± 5 N·m (41 ± 4 lb ft)

Caterpillar Information System:

HDB Series and M1 Series Heavy Duty Brushless Alternators General Information
Starting Motor Solenoid - Replace {1467} Starting Motor Solenoid - Replace {1467}
120H and 135H Motor Graders Centershift Lock Bar - Clean/Lubricate
2001/07/01 New Inlet Valves for Cylinder Head Groups in Truck Engines {1105}
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Service Tools
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System General Information
G3500 Engines Exhaust Bypass Valve
Chart for Heli-Coil Repair {0676} Chart for Heli-Coil Repair {0676}
3034 Marine Engine Exhaust Elbow - Remove and Install
2001/07/16 New Electronic Tachometers Have Different Connection To Wiring Harness {7462}
3126B Marine Engines Engine Wiring Information
3064 and 3066 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
HDB Series and M1 Series Heavy Duty Brushless Alternators Normal Operation
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Compression - Test
3126B Marine Engines Factory Passwords Worksheet
3126B Marine Engines System Configuration Parameters
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Single Module System (SMS)
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Multiple Module Systems that are equipped with Isolation Switches that are located in the System Cabinet
2001/08/01 New Inlet Valves for Cylinder Head Groups in Industrial Engines {1105}
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Power Supply - Remove and Install - Multiple Module Systems with Single Input or Dual Input with Maintenance Bypass
3034 Marine Engine - Installation Guide Engine Control
2001/08/06 New Inlet Valve for Cylinder Head Groups in Machine Engines {1105}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
3034 Marine Engine - Installation Guide Power Take-Off
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.