2001/07/16 Caterpillar


New Electronic Tachometers Have Different Connection To Wiring Harness {7462}

Usage:

D6D 03X
Machine Engines:
  • All
    Asphalt Paver:
    AP-1000 (S/N: 1HD1-UP)
    Cold Planer:
    PR-1000C (S/N: 5XC1-UP)
    PR-450C (S/N: 7PJ1-UP)
    PR-750C (S/N: 7CK1-UP)
    Off-Highway Truck/Tractor:
    786 (S/N: 80A1-UP; 81A1-UP)
    Road Reclaimer/Soil Stabilizer:
    RM-250C (S/N: AWG1-UP)
    RR-250 (S/N: 6ED1-UP)
    RR-250B (S/N: 3RR1-UP)
    SS-250 (S/N: 6DD1-UP)
    SS-250B (S/N: 5GR1-UP)
    Track-Type Loader:
    963B (S/N: 9BL1-UP)
    973 (S/N: 90L1-UP)
    Track-Type Skidder:
    D4H Series II (S/N: 2AC1-UP)
    Track-Type Tractor:
    D6D (S/N: 31X1-UP)
    D7G (S/N: 4YB1-UP)
    D6D DD SR (S/N: 7XF1-UP)
    Wheel Tractor-Scraper:
    627 (S/N: 54K1-UP)
  • There are two new tachometers available: 197-7347 Tachometer (Electronic) and 197-7348 Tachometer Gp (Electronic). The former 9X-1114 Electronic Tachometer and 9X-1116 Tachometer are now serviced by 197-7347 Tachometer (Electronic). The former 9X-1117 Tachometer is serviced by 197-7348 Tachometer Gp (Electronic).

    When the 9X-1114 Electronic Tachometer, 9X-1117 Tachometer, and the 9X-1116 Tachometer are replaced, the wiring harness connectors must be converted to DT connectors. In order to convert to DT connectors, a 155-2274 Connecting Plug Kit, 186-3736 Connector Sockets, and 8T-8737 Seal Plugs need to be ordered. Refer to Table 1 for a listing of all the parts that are needed to convert to DT connectors.

    Table 1
    Parts Needed to Replace the 9X-1114 Electronic Tachometer, 9X-1116 Tachometer, and the 9X-1117 Tachometer    
    Former Tachometer     Serviced By New Tachometer     Parts that Are Needed to Convert to DT Connectors    
    9X-1114 Electronic Tachometer     197-7347 Tachometer (Electronic)     155-2274 Connecting Plug Kit (Qty 1)
    186-3736 Connector Socket (Qty 4)
    8T-8737 Seal Plug (Qty 2) (1)    
    9X-1116 Tachometer     197-7347 Tachometer (Electronic)     155-2274 Connecting Plug Kit (Qty 1)
    186-3736 Connector Socket (Qty 4)
    8T-8737 Seal Plug (Qty 2) (1)    
    9X-1117 Tachometer     197-7348 Tachometer Gp (Electronic)     155-2274 Connecting Plug Kit (Qty 1)
    186-3736 Connector Socket (Qty 2)
    8T-8737 Seal Plug (Qty 4) (1)    
    ( 1 ) Use the 8T-8737 Seal Plugs to seal unused holes in the 155-2274 Connecting Plug Kit .

    The 197-7347 Tachometer (Electronic) has a backlight. The 197-7347 Tachometer (Electronic) requires four 186-3736 Connector Sockets. These sockets are required for the following connections:

    • positive signal connections and negative signal connections

    • positive battery connections and negative battery connections

    The 197-7348 Tachometer Gp (Electronic) does not have a backlight. The 197-7348 Tachometer Gp (Electronic) only requires two connector sockets: one connector socket for the positive signal and one connector socket for the negative signal.




    Illustration 1g00806834

    9X-1114 Electronic Tachometer (with backlight)

    (1) Battery +

    (2) Signal +

    (3) Signal -

    (4) Battery -




    Illustration 2g00806860

    9X-1116 Tachometer (with backlight)

    (5) Battery +

    (6) Signal +

    (7) Signal -

    (8) Battery -




    Illustration 3g00806856

    9X-1117 Tachometer (without backlight)

    (9) Signal +

    (10) Signal -




    Illustration 4g00806871

    197-7347 Tachometer (Electronic) (with backlight)

    (11) Signal +

    (12) Signal -

    (13) No connection

    (14) No connection

    (15) Backlight voltage +

    (16) Backlight voltage -




    Illustration 5g00806883

    197-7348 Tachometer Gp (Electronic) (without backlight)

    (17) Signal +

    (18) Signal -

    (19) No connection

    (20) No connection

    (21) No connection

    (22) No connection

    Caterpillar Information System:

    3126B Marine Engines Engine Wiring Information
    3064 and 3066 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
    CONVERSION CHART{0374} CONVERSION CHART{0374}
    3034 Marine Engine Coolant Temperature Sensor - Remove and Install
    3126B Marine Engines Electrical Connectors and Functions
    3034 Marine Engine V-Belts - Remove and Install
    3034 Marine Engine Engine Oil Pan - Remove and Install
    3034 Marine Engine Inlet Manifold - Install
    G3500 Engines Cooling System
    3034 Marine Engine Alternator - Remove and Install
    G3500 Engines Turbocharger
    G3500 Engines Exhaust Manifold
    3034 Marine Engine Exhaust Elbow - Remove and Install
    Chart for Heli-Coil Repair {0676} Chart for Heli-Coil Repair {0676}
    G3500 Engines Exhaust Bypass Valve
    69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System General Information
    69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Service Tools
    2001/07/01 New Inlet Valves for Cylinder Head Groups in Truck Engines {1105}
    120H and 135H Motor Graders Centershift Lock Bar - Clean/Lubricate
    Starting Motor Solenoid - Replace {1467} Starting Motor Solenoid - Replace {1467}
    HDB Series and M1 Series Heavy Duty Brushless Alternators General Information
    G3500B Engines Exhaust Manifold
    HDB Series and M1 Series Heavy Duty Brushless Alternators Normal Operation
    C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Compression - Test
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.