Generator Set Start Module Caterpillar


Specifications

Usage:

UPS 250 APZ

Table 1
Electrical Specifications    
Nominal Voltage (Voltage Regulation)     24 DCV (+10%/-40%) at 0 - 1000 amperes DC    
Current Rating     1000 amperes    
Input Voltage     Up to 720 ACV (line to line)    
Output Fusing     1000 amperes    
Rated number of start attempts     5 cycles of 10 seconds each    

Table 2
Physical Dimensions    
Height     914.40 mm (36.0 inch)    
Depth    
309.88 mm (12.2 inch)    
Width    
609.6 mm (24 inch)    
Weight    
181.44 kg (400 lb)    
Distance from UPS     <
152.4 m (500 ft)    
Distance from engine starter     <
7.62 m (25 ft)    
3-phase AC line from UPS (not provided)     #6 AWG, 4 wire    
DC cables (not provided)     Use 3/0 cable minimum for 1% maximum loss at 1000 amperes    
Indoor installation     NEMA 1 construction    
Operating temperature    
-20 °C (-4.0 °F) to
50 °C (122.0 °F)    
Storage temperature    
-25 °C (-13.0 °F) to
70 °C (158.0 °F)    
Humidity     5% to 95% (non condensing)    

Table 3
Fuses    
Location     Quantity    
Generator Set Start Module, Bus Inductor Fuse "F9"     1    
Generator Set Start Module, Generator Set Start Filter (1)     2    
( 1 ) Used only on UPS 250 model.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.