Seat - Remove and Install
Removal Procedure
- Slide the seat fully to the rear. Remove two bolts (1) from the front of the mounting bracket.
Show/hide table
Illustration 1 | g00729714 |
- Slide the seat fully to the front. Remove two bolts (2) from the rear of the mounting bracket.
Show/hide table
Illustration 2 | g00729724 |
- Use two people to remove seat (3). Weight of the seat is 36 kg (80 lb).
Note: Remove the seat by using the seat frame. Do not lift the seat by use of the seat adjustment levers.
Show/hide table
Illustration 3 | g00729727 |
- Remove four spacers (4) from seat support (5) .
Show/hide table
Illustration 4 | g00729731 |
Installation Procedure
- Place four spacers (4) onto seat support (5) .
Show/hide table
Illustration 5 | g00729731 |
- Use two people to install seat (3). The weight of the seat is 36 kg (80 lb).
Note: Install the seat by using the seat frame. Do not lift the seat by use of the seat adjustment levers.
Show/hide table
Illustration 6 | g00729727 |
- Slide the seat fully to the front. Install two bolts (2). This will secure the rear of the seat.
Show/hide table
Illustration 7 | g00729724 |
- Slide the seat fully to the rear. Install two bolts (1). This will secure the front of the seat.
Show/hide table
Illustration 8 | g00729714 |
Caterpillar Information System:
797 Off-Highway Truck Braking System Valve (Unloader)
2000/09/18 The Magnetic Drain Plugs on the Final Drive of 793 Off-Highway Trucks are Longer and Larger {4008, 4050}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Transmission Hydraulic Control Valve - Assemble
797 Off-Highway Truck Braking System Brake Valve (Chassis)
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Main Control Valve - Assemble
JF Series Starting Motor Pinion Continues to Engage after Engine Starts
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Axle Shaft - Remove
TH103 Telehandler Caterpillar Approved Work Tools
TH62, TH63, TH82 and TH83 Telehandlers Braking System Service Brake Air - Purge
416D Backhoe Loader Wheel Nut Torque - Check
416D Backhoe Loader Belts - Inspect/Adjust/Replace
2000/07/31 Revision to the Parts Manuals for the R2900 LHD {7301}
416D Backhoe Loader All Wheel Drive and All Wheel Braking Control - If Equipped
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Direct Drive) - Assemble
C-12, C-15 and C-16 Engines for Caterpillar Built Machines Low Engine Oil Pressure
CB-334D and CB-335D Vibratory Compactors Backup Alarm - If Equipped
CB-334D and CB-335D Vibratory Compactors Battery - Clean/Check
CB-334D and CB-335D Vibratory Compactors Battery - Recycle
2000/08/07 Revision to 3176C Engine Specifications for the R1600 LHD {1100}
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Diagnostic Codes
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Transmission - Disassemble
2000/08/07 New Software Is Available for the Electronic Transmission Control {3168, 7620}
3126B Engines General Information