Gauges
Show/hide table
 | |
| Illustration 1 | g00398598 |
Show/hide table
| Engine Coolant (1) - This gauge indicates the temperature of the engine coolant. The needle in the red range indicates abnormal engine temperature. |
Speedometer (2) (if equipped) - This gauge indicates the ground speed of the machine.
Show/hide table
| Fuel Level (3) - This gauge indicates the amount of fuel in the fuel tank. The needle in the yellow range indicates low fuel. |
Show/hide table
| Hydraulic Oil Temperature (4) - This gauge indicates the temperature of the hydraulic oil. The needle in the red range indicates excessive hydraulic oil temperature. |
Show/hide table
 | |
| Illustration 2 | g00398711 |
Show/hide table
| Voltmeter (5) - This gauge indicates the voltage of the electrical system. The voltage should be between 24 and 28 volts. The needle in the red range indicates low voltage or high voltage. |
Show/hide table
 | |
| Illustration 3 | g00398704 |
Show/hide table
| Service Hour Meter (6) - This gauge indicates the total operating hours of the engine. The service hour meter should be used to determine service hour maintenance intervals. The service hour meter is not on when the battery disconnect switch (if equipped) is in the OFF position. |
Caterpillar Information System:
IT14G Integrated Toolcarrier Thermal Starting Aid
IT14G Integrated Toolcarrier Engine Start Switch
IT14G Integrated Toolcarrier Battery Disconnect Switch - If Equipped
784B and 785B Off-Highway Truck/Tractors Steering System Piston Pump (Steering) Flow - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Pin Coupler Cylinder
IT14G Integrated Toolcarrier Steering Frame Lock
IT14G Integrated Toolcarrier Sound Information and Vibration Information
IT14G Integrated Toolcarrier Before Starting Engine
IT14G Integrated Toolcarrier Crushing Prevention and Cutting Prevention
IT14G Integrated Toolcarrier Warning Signs and Labels
IT14G Integrated Toolcarrier Alert Indicators
IT14G Integrated Toolcarrier Accelerator Control
IT14G Integrated Toolcarrier Light Switches
IT14G Integrated Toolcarrier Window Wiper and Washer Control
583R Pipelayer Power Train Track Idler
IT14G Integrated Toolcarrier Horn
IT14G Integrated Toolcarrier Directional Turn Signal and Hazard Flasher Control - If Equipped
IT14G Integrated Toolcarrier Backup Alarm - If Equipped
IT14G Integrated Toolcarrier Heating and Air Conditioning Control
IT14G Integrated Toolcarrier Seat
IT14G Integrated Toolcarrier Mirror
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Multipurpose Bucket Cylinder
IT14G Integrated Toolcarrier Lighter
914G Wheel Loader Alternate Exit