Engine Start Switch
Show/hide table
Illustration 1 | g00395819 |
Show/hide table
OFF (1) - Insert the engine start switch key only from the OFF position and remove the engine start switch key only from the OFF position. In the OFF position, there is no power to most electrical circuits in the cab. The cab lights, panel lights, tail lights, and the fuel gauge light are operational even when the engine start switch is in the OFF position. |
Turn the engine start switch key to the OFF position in order to stop the engine.
Show/hide table
ON (2) - Turn the engine start switch key clockwise to the ON position in order to activate all of the cab circuits. |
If equipped, the secondary steering motor will operate for three seconds when the engine start switch key is turned from the OFF position to the ON position.
Show/hide table
START (3) - Turn the engine start switch key clockwise to the START position in order to crank the engine. Release the engine start switch key after the engine starts and the engine start switch key returns to the ON position. |
Note: If the engine fails to start, the engine start switch key must be returned to the OFF position in order to attempt to start the engine again.
Caterpillar Information System:
IT14G Integrated Toolcarrier Battery Disconnect Switch - If Equipped
784B and 785B Off-Highway Truck/Tractors Steering System Piston Pump (Steering) Flow - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Pin Coupler Cylinder
IT14G Integrated Toolcarrier Steering Frame Lock
IT14G Integrated Toolcarrier Sound Information and Vibration Information
IT14G Integrated Toolcarrier Before Starting Engine
IT14G Integrated Toolcarrier Crushing Prevention and Cutting Prevention
IT14G Integrated Toolcarrier Warning Signs and Labels
IT14G Integrated Toolcarrier Alert Indicators
IT14G Integrated Toolcarrier Accelerator Control
550, 570 and 580 Wheel Harvesters Crushing Prevention and Cutting Prevention
583R Pipelayer Power Train Final Drive
IT14G Integrated Toolcarrier Thermal Starting Aid
IT14G Integrated Toolcarrier Gauges
IT14G Integrated Toolcarrier Light Switches
IT14G Integrated Toolcarrier Window Wiper and Washer Control
583R Pipelayer Power Train Track Idler
IT14G Integrated Toolcarrier Horn
IT14G Integrated Toolcarrier Directional Turn Signal and Hazard Flasher Control - If Equipped
IT14G Integrated Toolcarrier Backup Alarm - If Equipped
IT14G Integrated Toolcarrier Heating and Air Conditioning Control
IT14G Integrated Toolcarrier Seat
IT14G Integrated Toolcarrier Mirror
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Multipurpose Bucket Cylinder