 | |
| Illustration 1 | g00389649 |
Make sure that the steering frame lock link is placed in the STORED position. The steering frame lock link must be removed in order to steer the machine.
Start the engine only from the operator's compartment. Never short across the starter terminals or across the batteries. Shorting could bypass the engine neutral start system. Shorting could also damage the electrical system.
Inspect the condition of the seat belt and the condition of the mounting hardware. Replace any damaged parts or worn parts. Regardless of appearance, replace the seat belt after three years of use. Do not use an extension for a seat belt on a retractable seat belt.
Adjust the seat so that full pedal travel can be achieved. Make sure that the operator's back is against the back of the seat.
Make sure that the machine is equipped with a lighting system that is adequate for the job conditions. Ensure that all lights are in proper working condition.
Make sure that there are no personnel in the area before you start the engine. Make sure that there are no personnel in the area before you move the machine. Make sure that there are no personnel on the machine, underneath the machine, or around the machine.