Show/hide table
|
|
|
Illustration 1 | g00388196 |
Show/hide table
| Hydraulic Oil Filter Bypass (1) - The alert indicator will light when the hydraulic oil has bypassed the hydraulic oil filter. If this alert indicator comes on, stop the machine immediately. Engage the parking brake and stop the engine. Investigate the cause and correct the cause. |
Show/hide table
| Brake Oil Pressure (2) - The alert indicator will light when the brake oil pressure is low. If this alert indicator comes on, stop the machine immediately. Engage the parking brake and stop the engine. Investigate the cause and correct the cause. |
Show/hide table
| Engine Oil Pressure (3) - The alert indicator will light when the engine oil pressure is low. If this alert indicator comes on, stop the machine immediately. Stop the engine and investigate the cause. |
Show/hide table
| Coolant Temperature (4) - The alert indicator will light when there is excessive coolant temperature. If this alert indicator comes on, move the machine to a convenient location. Investigate the cause and correct the cause. |
Show/hide table
| Hydraulic Oil Temperature (5) - The alert indicator will light when there is excessive hydraulic oil temperature. If this alert indicator comes on, move the machine to a convenient location. Investigate the cause and correct the cause. |
Show/hide table
|
|
|
Illustration 2 | g00388201 |
Show/hide table
| Left Turn Signal (6) - The alert indicator will flash when the left turn signal is activated. |
Show/hide table
| Right Turn Signal (7) - The alert indicator will flash when the right turn signal is activated. |
Show/hide table
| Hazard (8) - The alert indicator will flash and the turn signals will flash when the hazard flashers are activated. |
Show/hide table
| Forward (9) - If the machine is equipped with a direction control switch, the alert indicator will light when the direction control lever is in the FORWARD position. If the machine is not equipped with a direction control switch, the alert indicator will not light when you are using the direction control lever. The indicator will light when the direction control switch (if equipped) is in the FORWARD position. |
Show/hide table
| Neutral (10) - If the machine is equipped with a direction control switch, the alert indicator will light when the direction control lever is in the NEUTRAL position. If the machine is not equipped with a direction control switch, the alert indicator will not light when you are using the direction control lever. The indicator will light when the direction control switch (if equipped) is in the NEUTRAL position. |
Show/hide table
| Reverse (11) - If the machine is equipped with a direction control switch, the alert indicator will light when the direction control lever is in the REVERSE position. If the machine is not equipped with a direction control switch, the alert indicator will not light when you are using the direction control lever. The indicator will light when the direction control switch (if equipped) is in the REVERSE position. |
Show/hide table
| High Beam (12) - The alert indicator will light when the high beams of the head lights are activated. |
Show/hide table
|
|
|
Illustration 3 | g00388200 |
Show/hide table
| Secondary Steering (13) (If Equipped) - The alert indicator will light when the electrical secondary steering motor is active. |
Use secondary steering to steer the machine when the primary steering is not functioning. Use the secondary steering to steer the machine when the alert indicator for the primary steering comes on and you have performed the following procedure.
Turn the engine start switch key to the ON position. The alert indicator for the secondary steering will come on for three seconds. Then, the alert indicator will go off. If the alert indicator for the secondary steering does not come on, investigate the cause.
Do not operate the machine until the cause has been corrected.
Show/hide table
| Primary Steering (14) - The alert indicator will light when the primary steering flow is not functioning. When you turn the engine start switch key to the ON position, the alert indicator for the primary steering will come on for three seconds. Then, the alert indicator will go off. If the alert indicator for the primary steering does not come on, investigate the cause and correct the cause. |
Show/hide table
| Work Lights (15) - The alert indicator will light when the work lights are activated. |
Show/hide table
| Electrical System (16) - The alert indicator will light when there is a malfunction in the electrical system. If this alert indicator comes on, the system voltage is too high for normal machine operation or too low for normal machine operation. |
If electrical loads (air conditioning and/or lighting) are high and the engine speed is near idle, increase the engine speed to high idle. This will generate more output from the alternator. If the alert indicator for the electrical system turns off within one minute, the electrical system is probably operating in a normal manner. However, the electrical system may be overloaded during periods of low engine speeds.
Modify the operating cycle in order to prevent overloading the electrical system and discharging the batteries.
Low idle must be set correctly. Adjust for the high side of the Low Idle specification while the most often used electrical loads are turned on. In order to reduce the loads, use the Medium fan speed instead of the High fan speed.
If this procedure does not cause the alert indicator to turn off, move to a convenient location. Investigate the cause (loose alternator belt, broken alternator belt, defective batteries, etc).
If the engine speed is near operating speeds and if the electrical loads are light, the alert indicator may remain on. If the alert indicator remains on, move to a convenient location. Investigate the cause (loose alternator belt, broken alternator belt, defective batteries, etc).
Show/hide table
| Parking Brake (17) - The alert indicator will light when the parking brake is engaged and when both the direction control lever and the direction control switch are in the NEUTRAL position. The alert indicator should come on during start-up. The alert indicator should go out when the parking brake is released. |
Show/hide table
|
|
|
Illustration 4 | g00388792 |
Show/hide table
| Lamp Test (18) - Press the top of the switch in order to test the lamps of the alert indicators. All of the alert indicators that are located on the left side of the steering console should come on when the engine is running. The action alarm should sound also. |
If all of the alert indicators that are located on the left side of the steering console do not come on, investigate the cause.