3176C and 3196 Industrial Engines Caterpillar


Engine Oil Pump

Usage:

3196 1DW



图 1g01436962



图 2g01436964

A-A 视图


注意

起动发动机之前,机油泵必须用清洁的发动机机油润滑。 机油泵必须徒手可以自由转动。 如果机油泵没有用清洁的发动机机油润滑,可能出现驱动齿轮和泵内部结构损坏。


(1) 发动机机油泵

泵排放压力 ... 359 kPa (52 psi)

(2) 轴

两根轴的直径 ... 18.000 ± 0.005 mm (0.7087 ± 0.0002 in)
泵体上用于两根轴的孔径 ... 18.050 ± 0.010 mm (0.7106 ± 0.0004 in)

(3) 密封凹槽

安装之前,润滑发动机前盖上的孔。 这会允许密封凹槽和密封件滑动。

(4) 驱动齿轮

加热主动齿轮到以下温度才能安装主动齿轮。 ... 316 °C (600 °F)

(5) 泵齿轮

加热泵齿轮到以下温度才能安装泵齿轮。 ... 316 °C (600 °F)
新齿轮的长度 ... 50.000 ± 0.025 mm (1.9685 ± 0.0010 in)
泵体上用于齿轮的孔深度 ... 50.13 ± 0.02 mm (1.974 ± 0.001'')

(6) 油封

安装之前,利用所密封的润滑剂稍微润滑孔。

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.