Air Inlet and Exhaust Lines
Show/hide table
Illustration 1 | g00280584 |
Front view (typical example) |
(1) Plug
- Torque ...
20 ± 5 N·m (15 ± 4 lb ft)
Apply 4C-5598 High Temperature Anti-Seize to the threads of the plug.
(2) Bolt
Apply 4C-5598 High Temperature Anti-Seize to the threads of the bolts that attaches the exhaust elbow.
Show/hide table
Illustration 2 | g00280588 |
Right side (typical example) |
Show/hide table
Illustration 3 | g00115247 |
Bolt tightening sequence (3508B) |
Show/hide table
Illustration 4 | g00280590 |
Bolt tightening sequence (3512B) |
Show/hide table
Illustration 5 | g00280589 |
Bolt tightening sequence (3516B) |
(3) Bolt
Use the following procedure to tighten the bolts for the aftercooler:
- Assemble seals to the aftercooler core.
- Temporarily secure the bottom seal with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal.
- Assemble the aftercooler with the seals to the inlet manifold.
- Inspect the bottom seal in order to ensure that the seating in the recess is correct.
- Install the aftercooler cover.
- Inspect the upper seal in order to ensure that the seating in the recess is correct.
- Install the cover bolts and hand tighten the bolts.
- Tighten the bolts according to the numerical sequence to the following torque.
Torque ...
24 N·m (18 lb ft) - Tighten the bolts again according to the numerical sequence to the following torque.
Torque ...
47 N·m (35 lb ft) - Remove the tape.
Caterpillar Information System:
3176C and 3196 Engines for Caterpillar Built Machines Valve Mechanism Cover
3500 Generator Set Engines Duplex Engine Oil Filters
3176C and 3196 Industrial Engines Valve Rocker Arm
3176C and 3196 Marine Engines Valve Mechanism
3176C and 3196 Engines for Caterpillar Built Machines Electronic Unit Injector Wiring
3512B and 3516B Engines Engine Coolant Temperature Sensor
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Aftercooler Coolant Temperature Sensor
3500B Engines for Caterpillar Built Power Modules Atmospheric Pressure Sensor
3612 and 3616 Fast Vessel Engines Engine Power Ratings
3618 Engine Fuel Tank Water and Sediment - Drain
3612 and 3616 Fast Vessel Engines Turbocharger - Inspect
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines ETS Component Descriptions
3500B Engines Auxiliary Water Pump - Sea Water
3500 Engines for Caterpillar Built Generator Sets Fan Drive
3612 and 3616 Fast Vessel Engines Engine Oil Level Gauge - Calibrate
3176C and 3196 Industrial Engines Engine Oil Pump
3500 Generator Set Engines Stub Shaft (Rear)
3500B Engines Auxiliary Drive Shaft
3612 and 3616 Fast Vessel Engines Sensors and Electrical Components
3176C and 3196 Marine Engines Engine Oil Pan
3176C and 3196 Marine Engines Auxiliary Water Pump
3176C and 3196 Marine Engines Auxiliary Water Pump
3612 and 3616 Fast Vessel Engines Tools
3500B Engines Engine Mount (Front) - Hydraulic Pump Drive or PTO Clutch