Valve Mechanism Cover - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Loosen hose clamp (1) from breather hose (2).
- Disconnect breather hose (2) from the crankcase breather.
- Remove bolts (3).
Show/hide table
Illustration 2 g00906442 Note: Remove tube assembly, if necessary.
- Remove valve mechanism cover (4) and the gasket from the cylinder head. Discard the gasket.
Show/hide table
| |
| Illustration 1 | g00906439 |
- Install the new gasket and valve mechanism cover (4) on the cylinder head.
Note: Ensure that the flat face of the gasket is toward the valve cover.
Show/hide table
Illustration 4 g00906439 - Install bolts (3).
- Connect breather hose (2) to the crankcase breather.
- Tighten hose clamp (1).
Show/hide table
| |
| Illustration 3 | g00906442 |
Caterpillar Information System:
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Fan
Bench Test Procedure for a D5M, D5N, D6M, D6N Track-Type Tractor, and 561N Pipelayer Transmission{3030, 3073, 3139} Bench Test Procedure for a D5M, D5N, D6M, D6N Track-Type Tractor, and 561N Pipelayer Transmission{3030, 3073, 3139}
3054E Industrial Engine Piston Cooling Jet
Bench Test Procedure for a D5M, D6M, and 561M Track-Type Tractor Transmission{3030, 3073} Bench Test Procedure for a 527 and 527B Track-Type Skidder Transmission {3030, 3073}
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers Steering System
CP-433E, CS-423E and CS433E Vibratory Soil Compactors Vibratory System Piston Pump (Vibratory System)
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 082 - CID 1125 - FMI 03
3508B Engine for D11R Track-Type Tractors Electronic Display Module
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers Differential and Final Drive
2002/08/05 Guidelines for Water Pump Visual Inspection {1361}
TH210 and TH215 Telehandlers Engine Supplement Battery - Remove and Install
CB-434C Vibratory Compactor Steering Pivot Clearance - Adjust
143H and 163H Motor Graders All Wheel Drive Hydraulic Schematic (All Wheel Drive)
R1600 Load Haul Dump Braking System Brake Disc Wear - Check
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 082 - CID 1125 - FMI 04
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 082 - CID 1125 - FMI 08
TH210 and TH215 Telehandlers Engine Supplement Muffler - Remove and Install
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Mirror
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 082 - CID 1127 - FMI 03
3056E Engine for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System Temperature Sensor (Hydraulic Oil)
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Machine Preparation for Troubleshooting
2002/08/05 A Special Instruction, REHS1294, "Procedure for the Installation of the Fast Fuel Fill Arrangement" Is Available {1273}
3056E Engine for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install